>> Homepage:Login:Register:Soul:Top Host   〖 lxl 〗

Forum style

Interface Style:

NAND flash Reply

Faraday Do you have manual how to handle NAND flashes with vp-990? Go back list [ Posted:2014-12-07 18:22:37 ]

Re:NAND flash Reply

myx1 download new software and check button "config". 1.if you have files and program all,you can choose "hard copy"and first on the left side(page=xxx).then program. 2.if your file need to read from first chip(with no bad blocks),choose the same as "1".then be sure second chip with no bad blocks. 3.if read first chip but it has bad blocks.and sure that bad-block mark is "0x0",you can choose "skip bad block" to read,and prgoram second. Go back list [ Posted:2014-12-08 12:45:12 ]

Re:NAND flash Reply

myx1 4.if not "0x0" choose the same as "2". 5.if second chip has bad blocks.only choose "hard copy(no)verify".this may do not work on the board because of lose value datas on bad block. if do not work,just change another chip. Go back list [ Posted:2014-12-08 12:45:56 ]

Total reply 2 ，total 1 page

[1]

Topic:	*(Within 40 characters)
Author:	*(The username should be within 10 characters)
Password:	*(When posted the message for the first time,it will automatically registered)
Verify Code:	* 6531
Sex:	male female (There is no need to choose if you have registered)
Head portrait:	(There is no need to choose if you have registered)
E-mail:
Q Q:	ICQ MSN
Homepage:
Emoticons:
Ubb label:
Message body
(Ctrl+Enter submit)

Tianjin Weilei Technology Ltd.