>> homepage Post messages Homepage:Login:Register:Soul:Top Host 
Forum style Interface Style:  

VP-490 recognized as VP-190 Reply  
handsome
nmp1970
 Hello,
After installing the new software upgrade (v4.6.5 from 14-08-2015) my VP-490 (4906-2141) changed to VP-190 (1906-1141).

The Software goes into demo mode and shows the error "The programmer type error!please notice Manufacture!".

I re-installed the software but the error remains.

When I run the wellon-reset.exe it says "Read file error!"

Please Advise

Go back list [ Posted:2015-08-17 08:59:14 ] Edit Administer top

Re:VP-490 recognized as VP-190 Reply  
handsome
lxl
 please send error photp to weilong@weilei.com.cn
Go back list [ Posted:2015-08-17 15:02:13 ] Edit Administer Top

Re:VP-490 recognized as VP-190 Reply  
handsome
nmp1970
 Hello,

Problem Solved.

Thank you so much for your very quick answer.

Best regards

Go back list [ Posted:2015-08-17 17:16:44 ] Edit Administer Top

Re:VP-490 recognized as VP-190 Reply  
handsome
aminatrix
 Hello.
I have the same problem. My programmer is VP-390.
After the firmware update, the programmer is presented as VP-190,
Displays error "The programmer type error! Please notice Manufacture!" and goes into the demo. I ran wellon-reset.exe, the program displayed the correct data. After pressing reset progress to 100% and ok. After running Wellon.exe the program reports an error. Please help.

https://drive.google.com/file/d/10HcqfWoUKHZFNsp16EJBnXsbf8jUG-dI/view?usp=sharing

[ The message is modified by aminatrix ]


https://drive.google.com/file/d/1IStEQ-jhuFQK8TNyPTXDXdMZhkSpnnAv/view?usp=sharing


https://drive.google.com/file/d/16fPW30NRQn9JCngIiR2co4GzPFPRp_Qp/view?usp=sharing

[ The message is modified by aminatrix ]
Go back list [ Posted:2020-06-16 21:10:50 ] Edit Administer Top

Re:VP-490 recognized as VP-190 Reply  
handsome
lxl
 please send the photo to weilong@weilei.co.cn, do not use google,please we cannot open it.
Go back list [ Posted:2020-06-19 08:02:42 ] Edit Administer Top

Re:VP-490 recognized as VP-190 Reply  
handsome
gbalangero
 Goodmorning,
after installing the new software update (v4.7.4 from 9-11-2021) my VP-490 (4905-1374) changed to VP-190 (1905-374).

The software goes into demo mode and displays the error "Programmer type error! Please note Manufacturing!".
I reinstalled the software but the error remains.

When I run wellon-reset.exe it tells me "File read error! 450000115DD1AE"

Thank You in advance.
Best Regards.
Gabriele

Go back list [ Posted:2021-12-08 20:59:40 ] Edit Administer Top

Re:VP-490 recognized as VP-190 Reply  
handsome
lxl
 wellon software Ver. 4.7.4 do not support VP490
Go back list [ Posted:2021-12-14 19:13:39 ] Edit Administer Top

Re:VP-490 recognized as VP-190 Reply  
handsome
fbalangero
 Hi to All,
after installing the new software update (v4.6.6 from 2-2-2016) my VP-490 (4905-1374) changed to VP-190 (1905-374).

Software goes into demo mode and displays the error "Programmer type error! Please note Manufacturing!".
I reinstalled the software but the error remains.

When I run wellon-reset.exe it tells me "File read error!"

What can I do to recover my programmer?!

Thank You.
Best Regards.
Franco

Go back list [ Posted:2022-01-10 20:13:59 ] Edit Administer Top

Re:VP-490 recognized as VP-190 Reply  
handsome
lxl
 please use wellon software ver. 4.6.0 to try.
Go back list [ Posted:2022-01-13 10:09:44 ] Edit Administer Top

Re:VP-490 recognized as VP-190 Reply  
handsome
fbalangero
 Hi, thank you for your suggestion.
I tried with sw 4.6.0 but no result.
Software doesn"t recognize programmer and goes in demo mode.
If i choose vp590 (vp490 not listed in menù) i receive comunication error.
Led blu and green is on when i connect usb cable to pc and i run the software.
Software contine to say me vp190 programmer...
What can i do to solve problem?
Please can you help me!
Greetings
Frank
Go back list [ Posted:2022-01-15 22:44:14 ] Edit Administer Top

Re:VP-490 recognized as VP-190 Reply  
handsome
lxl
 please send error photo to weilong@weilei.com.cn
Go back list [ Posted:2022-01-17 17:03:53 ] Edit Administer Top

Re:VP-490 recognized as VP-190 Reply  
handsome
fbalangero
 Hi, email with error detail and pics sended today.
Best Regards
Franco
Go back list [ Posted:2022-01-23 19:25:57 ] Edit Administer Top

Re:VP-490 recognized as VP-190 Reply  
handsome
fbalangero
 Hi, thanks for the support.
I followed your instructions and now the programmer works perfectly!
Many Many thanks.
Best Regards.
Franco
Go back list [ Posted:2022-01-28 15:57:41 ] Edit Administer Top
Total reply 12 ，total 1 page Forum Previous Next[1]

Reply the topic
Topic: *(Within 40 characters)
Author: *(The username should be within 10 characters)
Password: *(When posted the message for the first time,it will automatically registered)
Verify Code: * 8794
Sex: male female (There is no need to choose if you have registered)
Head portrait: (There is no need to choose if you have registered)
E-mail:
Q Q:
 ICQ MSN
Homepage:
Emoticons:
Ubb label:

Message
body
            (Ctrl+Enter submit)
Web homepage | Contact us | About us

Tianjin Weilei Technology Ltd.

218.75 ms