>> homepage Post messages Homepage:Login:Register:Soul:Top Host 
Forum style Interface Style:  

VP-280 unable to program EEPROM 27128 Reply  
handsome
standus
 I have VP-280 with latest SQ 4.3.4. FW 12.0.
I can not program any EEPROM 27128. I tested 5 peices but still fail.

This is message:
>>Man.Code:89 Dev. Code:83
>>.Blank Check......
>>Blank Check OK!
>>.Program......
>>Device Address:000000H Device Data:FFH Buffer Address:000000H Buffer Data:F3H
>>Program fail!

System-Test: OK
VPP Vol. Cal (21V) = 20.7V
EEPROM chips are user 1st time, cleared wit UV eraser.
What is the problem?
Go back list [ Posted:2017-03-17 20:55:44 ] Edit Administer top

Re:VP-280 unable to program EEPROM 27128 Reply  
handsome
lxl
 maybe the chips is bad.
Go back list [ Posted:2017-03-22 16:22:22 ] Edit Administer Top

Re:VP-280 unable to program EEPROM 27128 Reply  
handsome
standus
 All chips?
Go back list [ Posted:2017-04-01 14:56:16 ] Edit Administer Top

Re:VP-280 unable to program EEPROM 27128 Reply  
beautiful
lxx
 You can try using a UV eraser to erase the chip for more than 40 minutes. And add VP280"s power. If it is useless, give up those chips, they are at least 20 years old.
Go back list [ Posted:2017-04-06 09:45:09 ] Edit Administer Top
Total reply 3 ，total 1 page Forum Previous Next[1]

Reply the topic
Topic: *(Within 40 characters)
Author: *(The username should be within 10 characters)
Password: *(When posted the message for the first time,it will automatically registered)
Verify Code: * 7689
Sex: male female (There is no need to choose if you have registered)
Head portrait: (There is no need to choose if you have registered)
E-mail:
Q Q:
 ICQ MSN
Homepage:
Emoticons:
Ubb label:

Message
body
            (Ctrl+Enter submit)
Web homepage | Contact us | About us

Tianjin Weilei Technology Ltd.

312.50 ms