I am writing PCF8594C, the lower half of the chip is Ok but failing on the second half:
>>Load File OK! Time:22-Feb-11 13:43:10>>.Program......>>.Verify......>>Device Address:00000100H Device Data:9FH Buffer Address:00000100H Buffer Data:01H>>Program fail!>> 3.62Sec
This problem was already fixed before (28/02/2010) by your engineers.
I have test v4.3.0 (18/3/2010) works perfectly.The latest 4.3.2 fails.
Please advise.
D.
I just tried it with tPW set to 40ms, same problem.
0x100-0x1ff fails.
I tried several chips, all new, all fail.
I installed v4.3.0 (18/3/2010) - everything is Ok.
Regards,
I have tested and checked everything you asked for, nothing helps.
0x0-0xff writes Ok, 0x100-0x1ff fails.
The problem is in A0 addressing - this is a software selected pin in this device.
As I said - I have a version of your software that works fine, even with tPW set to 20ms.
The working version is:vp3.exe 1,466,368 bytes, dated 18-03-2010 10:10
Please fix your wellon.exe...
Dudi
Message body
Tianjin Weilei Technology Ltd.