>> homepage Post messages Homepage:Login:Register:Soul:Top Host 
Forum style Interface Style:  

VP-390 PIC16F716 Reply  
handsome
nathan
 Hi,

I am getting an error when trying to program a PIC16F716. I have tried several different IC"s of the same type without success.
I can program OK on my TOP2004 programmer but my new Wellon VP-390 does not work with this IC.

Every second erase fails. Every write fails.

Please help fix this issue.
Go back list [ Posted:2012-02-13 19:16:16 ] Edit Administer top

Re:VP-390 PIC16F716 Reply  
handsome
nathan
 1st Attempt:

>>Man.Code:29 Dev. Code:14
>>.Erase......
>>.Blank Check......
>>Device Address:000000H Device Data:0001H Buffer Address:000000H Buffer Data:0885H
>>Erase fail!
>> 0.46Sec
----------------------------!

[ The message is modified by nathan ]
Go back list [ Posted:2012-02-13 19:18:24 ] Edit Administer Top

Re:VP-390 PIC16F716 Reply  
handsome
nathan
 2nd Attempt:

>>Man.Code:29 Dev. Code:14
>>.Erase......
>>.Blank Check......
>> User ID ID0:FF ID1:FF ID2:FF ID3:FF


>>FIG:3FFFH Oscillator Type:RC WDT:Enable

>>Erase OK!
>>.Program......
>>.Verify......
>>Device Address:000000H Device Data:0001H Buffer Address:000000H Buffer Data:0885H
>>Program fail!
>> 2.85Sec

[ The message is modified by nathan ]
Go back list [ Posted:2012-02-13 19:18:59 ] Edit Administer Top

Re:VP-390 PIC16F716 Reply  
handsome
gxj
 Please download the latest software and upgrade system of the programmer
Go back list [ Posted:2012-02-14 14:35:31 ] Edit Administer Top

Re:VP-390 PIC16F716 Reply  
handsome
nathan
 I have upgraded the software to V4.3.4 and the programmer firmware from V13.0 to V14.0.

It is still broken.

I am now getting a Device code error.
ManCode:29, DevCode:FF

Go back list [ Posted:2012-02-14 20:33:30 ] Edit Administer Top

Re:VP-390 PIC16F716 Reply  
handsome
gxj
 Please download the latest software today.
Go back list [ Posted:2012-02-15 10:14:32 ] Edit Administer Top

Re:VP-390 PIC16F716 Reply  
handsome
nathan
 Hi,

Still the same problem trying to program a PIC16f716.
I have updated the Software to V4.3.4 (14/02/2012) and the programmer firmware to V15.0.
Every second erase looks like it works but it doesnt. When trying to program they always fails.

Thanks,

Nathan

Go back list [ Posted:2012-02-15 19:17:25 ] Edit Administer Top

Re:VP-390 PIC16F716 Reply  
handsome
gxj
 We have tested this chip, but we did not find any problems.Please change another chips to try
[ The message is modified by gxj ]
Go back list [ Posted:2012-02-16 13:20:23 ] Edit Administer Top

Re:VP-390 PIC16F716 Reply  
handsome
nathan
 Hi,

I have completed another couple of tests using various programmers on the same PIC16F716 IC.
Below are the results:
Go back list [ Posted:2012-02-16 19:59:46 ] Edit Administer Top

Re:VP-390 PIC16F716 Reply  
handsome
nathan
 Programmer: Wellon VP390
IC: PIC16F716
Operating System: Windows 7 Ultimate 64bit
Result: FAILED

Programmer: Wellon VP390
IC: AM29F040B
Operating System: Windows 7 Ultimate 64bit
Result: SUCCESS

Programmer: Topwin 2004
IC: PIC16F716
Operating System: Windows XP Professional 32bit
Result: SUCCESS

Programmer: Microchip ICD2
IC: PIC16F716
Operating System: Windows 7 Ultimate 64bit
Result: SUCCESS
Go back list [ Posted:2012-02-16 20:00:32 ] Edit Administer Top

Re:VP-390 PIC16F716 Reply  
handsome
nathan
 The Wellon programmer works correctly with the AMD Micro, but Fails with the PIC.
I used the same physical PIC in my TOP2004 and ICD2 programmers and it programmed up correctly.

There is definitely something wrong with the Wellon programmer. Can you please look further into it.

Thank you,
Go back list [ Posted:2012-02-16 20:01:17 ] Edit Administer Top

Re:VP-390 PIC16F716 Reply  
handsome
lxl
 Please download the latest software.
Go back list [ Posted:2012-02-17 20:31:46 ] Edit Administer Top

Re:VP-390 PIC16F716 Reply  
handsome
nathan
 The latest version has fixed the issue.
Thank you for your persistence.
Go back list [ Posted:2012-02-18 07:06:00 ] Edit Administer Top
Total reply 12 ，total 1 page Forum Previous Next[1]

Reply the topic
Topic: *(Within 40 characters)
Author: *(The username should be within 10 characters)
Password: *(When posted the message for the first time,it will automatically registered)
Verify Code: * 9300
Sex: male female (There is no need to choose if you have registered)
Head portrait: (There is no need to choose if you have registered)
E-mail:
Q Q:
 ICQ MSN
Homepage:
Emoticons:
Ubb label:

Message
body
            (Ctrl+Enter submit)
Web homepage | Contact us | About us

Tianjin Weilei Technology Ltd.

187.99 ms