Tianjin Weilei Technology Ltd.

Homepage:Login:Register:Soul:Top Host

Forum style

Interface Style:

cannot progam 48 pin TSOP in DIP42

kipper2k

I　use a 27c800 42 DIP socket type.　I want to use a AM29F800B 48 pin TSOP on a 42 pin adapter instead. I created a 42 pin DIP adapter with the 29F800B TSOP and tried to program it in the Wellon 380 programmer. it can do a blankcheck fine and a read fine but not a write.

http://dforce3000.de/pub/datasheets/27c800.pdf

http://www.spansion.com/Support/Datasheets/AM29F800B_EOL_21504e8.pdf

Go back list

[ Posted:2012-12-21 22:55:38 ]

Re:cannot progam 48 pin TSOP in DIP42

kipper2k

the Willem programmer will program this using the dip adapter so i do not know what is the problem

Go back list

[ Posted:2012-12-21 23:08:08 ]

Re:cannot progam 48 pin TSOP in DIP42

jin

We only support the 29f800b tsop48, it will use the adapter WL-TSOP48-U2. We can"t use the dip42 adapter to write 29F800B TSOP48.

Go back list

[ Posted:2012-12-24 16:46:38 ]

Re:cannot progam 48 pin TSOP in DIP42

kipper2k

Thanks for the reply.　Due to the chip being soldered onto the 42pin adapter board your adapter would be of no use so i will make an adapter board for it.　I am assuming that the adapter board you mentioned is a pin for pin adapter ( 1 to 1, 2 to 2 etc) ?

Go back list

[ Posted:2012-12-24 23:32:46 ]

Total reply 3 ，total 1 page

[1]

Reply the topic

Web homepage | Contact us | About us

Tianjin Weilei Technology Ltd.

360.35 ms