Tianjin Weilei Technology Ltd.

Homepage:Login:Register:Soul:Top Host

Forum style

Interface Style:

Total 1426,Total 29 pages

[<<][6][>>]

bom dia! tem como lê memória (BGA64)

regi-silva register

bom dia! tem como lê memória (BGA64). GL128P no programador WELLON VP896. com Adaptador BGA64 sem CHIP?

Last post : Re:bom dia! tem como lê memória (BGA64)	Reply: lxx
Please use English

All replies (1)

[ Posted:2017-06-04 22:32:21 ]

vp-390

llcalin

can vp-390 read/write at88sc eeprom?
what wellon programmer can do it?

Last post : Re:vp-390	Reply: lxl
you need select GP600/400,VP998

All replies (1)

[ Posted:2017-05-30 18:49:27 ]

M28w320fst adapter

emilien

What adapter can i use for M28w320fst programming?
What is difference of wl-ebga64-145-1 and wl-ebga64-140-1 and wl-ebga64-139-1 and wl-ebga64-138-1
Regards

Last post : Re:M28w320fst adapter	Reply: lxl
chip package?

All replies (1)

[ Posted:2017-05-19 01:15:07 ]

Wellon VP-496

Mike Brown register

Hello, I have a Wellon VP-496 and I"d like to buy a WL-TSOP56-E141 adaptor to read/write Spansion S29GL128 NOR memories. Is it possible to do with this programmer?

Last post : Re:Wellon VP-496	Reply: lxl
yes

All replies (1)

[ Posted:2017-05-17 21:00:51 ]

Atmel AT24C16B and ISP10

GravuTrad

Hi,
I have VP-ISP10 with windows 10.(xp compatibility activated).tried idem with windows 7.
I try to use it by SPI on a Atmel AT24C16B (only, not other letter more)
I must use AT24C16(ISP) profile to have it recognized.
But for each operation,all fail with:
Device Address:00000000H　Device Data:00H
And i"m blocked to de-crash a bad bios update on an hp sr5707fr computer
What"s the problem please?
Thanks for the urgent help.

[ The message is modified by GravuTrad ]

Last post : Re:Atmel AT24C16B and ISP10	Reply: myx1
vp-isp10 use standard I2C bus to program AT24C16B. i donn"t know about SPI to I2C bridge. If it use the SPI protocol to write AT24C16,the programmer cannot write correctly. if you only want to program AT24C16B,maybe you can take the chip down and link the chip pins directly.

All replies (10)

[ Posted:2017-04-23 07:03:12 ]

rewrite or erase memory spansion gl032n

fabiode

Good morning, please help, I can not rewrite or erase memory spansion gl032n90ffis2, can anyone help me ?, thank you.

Last post : Re:rewrite or erase memory spansion	Reply: myx1
it"s S29GL032NxxFFIS2 @64EBGA. please tell the programmer type? and the software version? check the adapter, and select "Device ID Check".

All replies (1)

[ Posted:2017-04-30 00:36:18 ]

am29F400 42pin

achille

Please help me. I have a Wellon VP-598 programmer. I have to read a 44-pin IC AM29F400B *. In the software database there are only 48-pin AM29F400B *, as I do.

Last post : Re:am29F400 42pin	Reply: lxx
Vp598 dn not support that 44 pins chip. According to the chip schematic, you can design a PCB that convert 48 pins to 44 pins.

All replies (2)

[ Posted:2017-04-28 14:16:38 ]

vP 190 programmer error

B G Aminu

Please help me, i buy the above programmer, but whenever i try to progam
microchip PICs it appear the configuration bits are not programmed,also the program memory is not properly programmed. is there any setting i missed
on the interface?

Last post : Re:vP 190 programmer error	Reply: myx
which PICs ? the chip type? [ The message is modified by myx ]

All replies (1)

[ Posted:2017-04-24 22:56:54 ]

MX25L12805D

imperpl

Please add support for MX25L12805D on VP480 (or newer)

Last post : Re:MX25L12805D	Reply: myx
VP-480 has been stopped update.it"s finally verision is 4.2.0.

All replies (2)

[ Posted:2011-05-11 18:01:44 ]

socket adapter for kh25l3255exci

conouy

Hi friends ...

i need read bga kh25l3255exci ....

what socket use it .

thz

Last post : Re:socket adapter for kh25l3255exci Reply: myx registered

can you select MX25L3255EXCI *24BGA ?
if the chip is MACRONIX, try MX25L3255EXCI

All replies (5)

[ Posted:2017-03-03 20:40:52 ]

ghreeb moataz

marey

i have vp490 i cont program 25q32fvsig and 25q64fvsig how con i program this

Last post : Re:ghreeb moataz	Reply: myx
select W25Q32FVDA and W25Q64FVDA to program.

All replies (1)

[ Posted:2017-04-24 06:58:20 ]

adaptador BGA64

regi-silva register

boa noite a todos! alquem tem o binario do I.C DS28E01 que fica no ADAPTADOR BGA64 da WELLON? manda para meu email por favor. ficarei muito grato! obrigado.

Reply the message

[ Posted:2017-04-18 13:09:48 ]

VP-280 unable to program EEPROM 27128

standus

I have VP-280 with latest SQ 4.3.4. FW 12.0.
I can not program any EEPROM 27128. I tested 5 peices but still fail.

This is message:
>>Man.Code:89 Dev. Code:83
>>.Blank Check......
>>Blank Check OK!
>>.Program......
>>Device Address:000000H Device Data:FFH Buffer Address:000000H Buffer Data:F3H
>>Program fail!

System-Test: OK
VPP Vol. Cal (21V) = 20.7V
EEPROM chips are user 1st time, cleared wit UV eraser.
What is the problem?

Last post : Re:VP-280 unable to program EEPROM 27128 Reply: lxx registered

You can try using a UV eraser to erase the chip for more than 40 minutes. And add VP280"s power. If it is useless, give up those chips, they are at least 20 years old.

All replies (3)

[ Posted:2017-03-17 20:55:44 ]

ERROR PROGRAM FAILED VP-390

franzlie

Hi,

Need help how to solve program failed when using ST M27C256B-12F1B8801315L

. THANKS

[ The message is modified by franzlie ]

Last post : Re:ERROR PROGRAM FAILED VP-390	Reply: myx
1.clean chip pins and socket to make the connect well. 2.use AC adapter. 3.eraser time longer than 40 min,at least. if your chip do not have erase window，it may be one-time chip.

All replies (1)

[ Posted:2017-03-06 09:32:10 ]

Ebga64 flash reader ?

Eboy

Hello,

I need to read / write few flash Ebga64.

Wich model of Weilei flash programmer do i need to buy & socket ?

Thanks for your advice !

Regards

Last post : Re:Ebga64 flash reader ? Reply: lxl Host

VP996/998, GP800

All replies (1)

[ Posted:2017-02-27 18:20:32 ]

vp-990 MT29F1G08ABADA

darlaw

How to programme the flash. I have tried 3 pieces with a few version of software. Give me an addivise.

Last post : Re:vp-990 MT29F1G08ABADA	Reply: lxl
if you copy chip,you need use no bad block chip. if you want use the chip with bad block,maybe you need order sperial skip bad block algorithm

All replies (3)

[ Posted:2017-02-14 22:40:39 ]

EPM7128plc84

lotharek

Hello

id there any achnce my 996 can erase altera cpld to enable jtag programming ?
some time ago i did on my seocnd other wellon with atf1508..

Last post : Re:EPM7128plc84 Reply: lxx registered

You can select ATF1508AS (ISP)

All replies (3)

[ Posted:2017-02-13 00:29:15 ]

VP-390 Low input and ground

henrykristy register

Hello I have 3 different vp 390s and they work for a short time and then they stop initializing. When I do a self test it tells me it has a low input and ground. I am running the most current software using windows xp. These are failing way to early.

Last post : Re:VP-390 Low input and ground	Reply: lxx
Please send selftest"s picture to support@weilei.com.cn

All replies (1)

[ Posted:2017-02-13 18:30:25 ]

Gms97c52

Valerio

Good morning, I have successfully copied the program with VP490 Hynix gms97c52 PL24 (class t :?) but I can not copy it to Hyundai gms97c52 pl (class t:?). I can you please help? Thanks. Valerio

Last post : Re:Gms97c52	Reply: Valerio
Auto program..... Blanca check..... Program..... device adress:00000000H device data FFH. Buffer data:02H Auto program fail 0,45sec VP 490　　Ver:4.6.5 Firmware: 21.0.　Grazie

All replies (1)

[ Posted:2017-02-10 15:03:34 ]

SPANSION S25FL256S help

fabiode

Good evening, I can not write SPANSION S25FL256S in vp990, I can read, delete but nothing to record

Last post : Re:SPANSION S25FL256S help	Reply: lxx
Your Email is wrong.

All replies (2)

[ Posted:2017-02-01 19:47:00 ]

software vp 980

carlos magno register

ola bom dia estou precisando do software do vp 980 pois perdi o cd do meu e nao consigo mais usalo . ok. fico no aguardo.

Last post : Re:software vp 980	Reply: lxx
We send sofeware to you by 961458944@qq.com.

All replies (1)

[ Posted:2017-01-25 20:19:26 ]

MT46H16M16LFBF-6 IT:H

fabiode

boa tarde, como consigo ler essa memoria, MT46H16M16LFBF-6 IT:H

Last post : Re:MT46H16M16LFBF-6 IT:H	Reply: lxx
It don"t need program.

All replies (3)

[ Posted:2016-01-27 23:17:27 ]

S29GL064Nxx FFIFR2 @32FBGA

fabiode

por favor, como apagar essa bga, pra eu conseguir gravar novamente, parece estar protegida contra gravaçao, consigo ler normalmente, obrigado.
S29GL064Nxx FFIFR2 @32FBGA

Last post : Re:S29GL064Nxx FFIFR2 @32FBGA	Reply: lxx
In buffer from 0 to &H7FFFFF, it can be erase. From &H800000 to &H8000FF,it is only write one time.

All replies (3)

[ Posted:2016-07-10 01:03:31 ]

SPANSION　 S25FL256S

fabiode

boa noite, nao consigo gramar SPANSION　 S25FL256S na vp990, consigo ler, apagar mas nada de conseguir gravar, help

Reply the message

[ Posted:2017-02-01 08:25:48 ]

Win 10 Version for VP-480

stephr1

Hi,

　I have an older (and now unsupported :( VP-480 programmer. I upgraded my system from Win 7 to Win 10. Is there a version of the programmer s/w I can use that will work with Win 10?

Shih shih.....

Last post : Re:Win 10 Version for VP-480 Reply: stephr1 registered

Sorry to hear that.
Shih shih....

All replies (2)

[ Posted:2017-01-24 05:51:23 ]

S29AL016D90TFA01

j0ska

Hello,
Trying to read and write this eeprom with VP-596 FW 22.0 SW 4.6.6
Adapter WL-TSOP48-U001
Tested on Windows 8 64 bit　and Windows 7 64-bit

Reading gets different output each time!
Auto program always fail.
Verify always fail.

Same behavior with EEPPROM S29GL032A90TFAR4

How can i fix it?

Last post : Re:S29AL016D90TFA01 Reply: j0ska registered

There was a problem in decimal point. In my windows setting i have decimal point "," not "."
In wellon software i see 3,00 but i have to input 3.3 for change.
If i input 3.3 noting is changed.
Writing to eeprom is working at 3,35V
Thank you for your help.

All replies (4)

[ Posted:2017-01-21 22:02:02 ]

ELF-files?

Haakan

Can WELLON programmer software import ELF-files?

Regards,

Last post : Re:ELF-files? Reply: lxx registered

Our programmer don"t support ELF-file.

All replies (1)

[ Posted:2017-01-19 22:42:09 ]

Support 25L1673E/3273E/6473E SOP8

chello

Hello, Can I ask you for add support this EEPROM ? MACRONIX MX25L1673E,MX25L3273E,MX25L6473E with SOP8 package. Can be read with MX25Lxx06E, but canot write correctly. When I used READ via 25L1673E (SPI) everywhere is the value FF. Thank you for reply.

Last post : Re:Support 25L1673E/3273E/6473E SOP8	Reply: chello
Thank you for answer. I see in others wellon programmer, that support for 25L3273E there is. It"s a shame That wellon ended support for the VP890. I will not buy next product from wellon When, I lose after two years of support. SPI was a typo, I meant ISP.

All replies (4)

[ Posted:2017-01-10 01:05:31 ]

VP890 Last Firmware

guliver

Please, how last firmware for VP890 ?

Last post : Re:VP890 Last Firmware	Reply: chello
Hello, I have VP890 and firmware version 23.00 with software 4.7.1. But the latest software use is not very good idea. In SW 4.7.1 and 4.7.0 was removed many SPROM device from the list or may only use ISP cable. You can use older software, for example 4.6.6. It works much better.

All replies (1)

[ Posted:2017-01-16 01:48:40 ]

Best VP model

DaveH

Which is the top model - and which is newest: VP-996 (>10K device support) or VP998 (<10K device support)

Thanks . . . Dave H

Last post : Re:Best VP model Reply: DaveH registered

Does the VP-996 run under Windows 10 (it"s not in the Technical Specification)?
I need to test Dynamic RAM (VP-996) and run reliably under Windows 10 (VP-998) . . .
Thanks . . . Dave H

All replies (1)

[ Posted:2017-01-16 20:09:07 ]

Wellon 896 and Tsop 56 Chips

binkers87

I am getting error "Do not find adapter.set adapter.Run (Read) without chip on adapter"

Do I have to use the wellon tsop56? Why can"t I use my own? What is different about WL-TSOP56-E141

Reply the message

[ Posted:2017-01-12 19:40:44 ]

VP598 w/ NXP P87C52X2FA

Spud

Hello, I am attempting to use the VP 598 to program NXP P87C52X2FA and it　　allows me to use the read function but I am unable to program.

my error message is as follows...
>>Auto Program.......
>>Blank Check.......
>>Device Address:00000000H Device Data:FFH Buffer Data:21H
>>Auto Program fail!
>>0.37Sec
.................!

Last post : Re:VP598 w/ NXP P87C52X2FA Reply: Spud registered

WL-PLCC44-U1　　 Is this the incorrect adaptor?

All replies (2)

[ Posted:2017-01-10 04:23:53 ]

Ver: 4.3.4(13/03/2012)

LegoupilJL register

Could you kindly repair the link to the download of　 Ver: 4.3.4(13/03/2012) of your software. I have a good VP-380 that I want to still use. Thanks!

Last post : Re:Ver: 4.3.4(13/03/2012)	Reply: lxx
We will send software to your Email.

All replies (1)

[ Posted:2017-01-07 00:57:07 ]

NXP P89LPC936FA

kyo

Hello everyone.
Please add device NXP P89LPC936FA PLCC 28 pins in Vp798 or Vp996.
Thank you

[ The message is modified by kyo ]

Last post : Re:NXP P89LPC936FA	Reply: kyo
Very very thank you

All replies (3)

[ Posted:2016-12-21 18:21:40 ]

Can"t select device from list

rmaynes

I am running Ver: 4.6.0 on a PC.
Although I can initialize the attached VP990, when I select SHARP LH28F160S5HT*56TS, I get:
" Run-Time error "3409" Cannot open database "C:\weili\WELLON\lib1\vp398.bin". It might not be a database that your application recognizes, or the file may be corrupt "
and the Run Time Viewer displays: " ChipSlt Err! "

Reply the message

[ Posted:2016-12-23 04:08:56 ]

vp-996 erro S29GL512P10TFIR1

rolfguse

>>.Auto Program......
>>Device Address:00000000H　Device Data:00FFH　Buffer Data:3860H
>>Auto Program fail!
>> 0,75Sec

Last post : Re:vp-996 erro S29GL512P10TFIR1	Reply: lxl
maybe the chips are bad.

All replies (3)

[ Posted:2016-12-08 18:21:21 ]

vp390 wont read pin21 burning m27c322

happyhappy register

so been using this programmer for a couple years now and for the most part its been working well. so i been programming chips all day and one wouldnt read pin 21. so i clean the pin and put it back in and it still wont read. so i get another eeprom and now all wont read pin 21. any ideas? thanks

Last post : Re:vp390 wont read pin21 burning m27c322	Reply: lxl
yes,you can

All replies (3)

[ Posted:2016-12-13 15:46:11 ]

arquivo.bin DS28E01 adaptador BGA64 WL

regi-silva register

Olá boa tarde Alguém poderia me enviar o arquivo Bin do DS28E01 usado no BGA64 Soquete WELLON VP-896 Programador, VP-996 ??? Obrigado pela sua resposta.

Last post : Re: DS28E01 adaptador BGA64 WL	Reply: lxl
DS28E01 do not need BGA64 adapter

All replies (1)

[ Posted:2016-12-12 10:35:45 ]

sdin7du2-8g support for VP-996

sukhorukof register

Can you please add sdin7du2-8g support for VP-798?

[ The message is modified by sukhorukof ]

Reply the message

[ Posted:2016-12-09 17:30:54 ]

problem 29F2G08ABAEA VP996

rolfguse

29F2G08ABAEA Man.Code Error: FF Dev . Code : FF not I can use to write read OR erase NAND flash THIS.

[ The message is modified by rolfguse ]

Last post : Re:problem 29F2G08ABAEA VP996	Reply: lxl
send adapter photo and error photo to weilong@weilei.com.cn

All replies (5)

[ Posted:2016-09-09 21:44:37 ]

device code error

thanosxx

Hello to everybody I am new in this forum .Before few days I bought a wellon vp-996 and when I try to read a flash memory (intel AB28F200BX) I have the message <Man.CodeFF　Dev.Code:FFFFF> Do oyu know anybody what is this message?

Last post : Re:device code error	Reply: lxl
maybe your adapter is incorrect

All replies (1)

[ Posted:2016-12-08 06:51:17 ]

wellon vp-490 crash

jonpim

Hi
Programmer VP-490 in the next update of the program version
4.6.6 flew in the serial number and firmware version identifier.
Now the programmer is not working. Reset driver reset is done via a program complete with version 4.6.6.
Help restore the programmer, there is no money to buy a new !!!!

Last post : Re:wellon vp-490 crash	Reply: lxl
please send error photo to weilong@weilei.com.cn

All replies (4)

[ Posted:2015-12-13 13:07:16 ]

new software problem ?

s@parator

what problem new software 21-11-2018
all dewice no suported my programmer VP990.

http://uploadpie.com/lCEKX

Last post : Re:new software problem ? Reply: lxl Host

VP990 have stop produce many years, and it is one-year warranty

All replies (3)

[ Posted:2016-11-24 14:52:29 ]

Sandisk SDIN5D2-4G

fruti

Hello, i can"t find this emmc chip that you support?
Will you support that soon or never ?
Regards

Last post : Re:Sandisk SDIN5D2-4G	Reply: lxl
sorry, VP-980 have stop produce many years

All replies (3)

[ Posted:2016-11-25 06:47:22 ]

k9gag08u0e-scb0

sinfan

I have vp-990.When i select k9gag08u0e the size on buffer is 1093MB.　　　The file must be 2.13GB. Another user also have that question, but no　　 solution

Last post : Re:k9gag08u0e-scb0	Reply: lxl
k9gag08u0e is splited k9gag08u0e(0) and k9gag08u0e(1)

All replies (1)

[ Posted:2016-11-25 22:48:18 ]

MC68HC908MR32

hadiengg

Dear sir please add MC68HC908MR32 in the supported device list.

Reply the message

[ Posted:2016-11-24 19:19:31 ]

S29GL128

Salemdecod register

I have wellon gp2 i can"t read s29gh128
With adapter TSop56

Last post : Re:S29GL128	Reply: lxl
need adapter WL-TSOP56-E141

All replies (1)

[ Posted:2016-11-18 15:20:04 ]

add flash　ADESTO AT45DB161E

s@parator

Pleace add flash　ADESTO AT45DB161E link chip ...Flash 9 Ball.
http://www.adestotech.com/fileview/1477331831485976354doc8782.pdf

[ The message is modified by s@parator ]

Last post : Re:add flash　ADESTO AT45DB161E	Reply: s@parator
spacing pin adapter is the same and there is no need to change the adapter to a different adapter please adjust to 24EBGA WL-U001 adapter size and chi is the same as adesto 9pin ebga = atmel 24 EBGA seriies.

All replies (11)

[ Posted:2016-10-25 02:03:54 ]

drive usb win10

fabiode

driver usb windows10 please.

Last post : Re:drive usb win10	Reply: lxl
wellon new programmer supports windows 10

All replies (1)

[ Posted:2016-11-07 05:37:09 ]

.I have a programmer Wellon help vp 896

daniel32

.I have a programmer Wellon help vp 896 and I can not schedule nand memories .. I can not help if this problem is failing or configuration

Last post : Re: a programmer Wellon help vp 896	Reply: lxl
select no bad block chip

All replies (1)

[ Posted:2016-11-04 12:20:08 ]

Total 1426,Total 29 pages

[<<][6][>>]

search: title content user

Web homepage | Contact us | About us

Tianjin Weilei Technology Ltd.

156.25 ms