Tianjin Weilei Technology Ltd.

Homepage:Login:Register:Soul:Top Host

Forum style

Interface Style:

Total 1464,Total 30 pages

[<<][9][>>]

vp906, and vp996

doc copley register

What is the difference between a vp896 and a vp996?

Last post : Re:vp906, and vp996	Reply: lxl
the support chips of VP996 is more than VP896

All replies (1)

[ Posted:2016-03-01 05:09:16 ]

Please add TFBGA MX + Winbond

separator

Please add BGA
MX25L3255DX 24 ball tfba
Winbond 25Q32FVCIP 24 ball TFBGA
My programmer VP 890
Thanx

Last post : Re:Please add TFBGA MX + Winbond	Reply: separator
Thanx @lxl.

All replies (3)

[ Posted:2016-02-25 18:03:45 ]

Input high error message - vp280

Peter Cole register

Hi! I have a VP-280 which has been very reliable until today! Now I am getting an error message "Input high" on pin 18. Is this something I can fix myself or does my programmer have to go back to your facility in China?

Last post : Re:Input high error message - vp280	Reply: lark
Please change V11(SS8550), V31 (SS8550) and Q3(SS8050) on the top board, and try.

All replies (1)

[ Posted:2016-02-03 12:21:07 ]

GP800 and　RC28F128J3A or RC28F128J3C

RTVM

Hi,

please urgent solve problem:

>>Load File OK! Time:30.03.2014 22:28:39
>> 0,00Sec

>>.Auto Program......
>>.Erase......
>>.Program......
>>Device Address:00005680H　Device Data:C300H　Buffer Data:0100H
>>Auto Program fail!
>> 182,09Sec
----------------------------!
Problem occure after update from 4.6.5 to 4.6.6(30.10.2015) and FW:22!!

Thanks,

RTVM

Last post : Re:GP800 and　RC28F128J3A or RC28F128J3C Reply: RTVM registered

Please read your email!!
Thanks,
RTVM

All replies (8)

[ Posted:2015-11-08 04:24:45 ]

Your website does not work !

benaknoun

Your website www.weilei.com does not work properly and it"s like this for a long time, the forum is really poor, doesn"t connect, takes a long time to load...etc
The download section is the worst, i am trying to download the software for my VP990 and it says website is offline, and it has been like this for many days, it works for 5 minutes than stops for many days.
Please fix this, it is a shame Weilei does not have a proper website.

Last post : Re:Your website does not work !	Reply: benaknoun
However, today your forum is working a little better, but two days ago it was 0

All replies (3)

[ Posted:2015-12-21 05:02:27 ]

Problems with VP-280 & M48T18 Timekeeper

toibs

Hi Guys,
I am trying to duplicate a Timekeeper M48T18 chip. A working original chip has time data between 1FF8h and 1FFF. I can see this in the dump that i have taken from the original.

I have read the complete image from the original chip, however obviously want to write only up to (and not including) 1FF8h. I have set the device end address to 1FF7, however every time it overwrites the values currently in 1FF7 - 1FFF.

Any advice??

Thanks
Paul

Last post : Problems with VP-390 & M48T18 Reply: alfonsorg registered

Thank you. I"ll find a way to do it . Thank you.

All replies (9)

[ Posted:2009-03-30 22:16:52 ]

NAND flash spare area

bugmenot

Do Wellon programmers support reading NAND flash chips" spare area (which contains bad block flag, ECC, page/block number, logical block number, etc.)?

Last post : Re:NAND flash spare area	Reply: lxl
yes, select "hard copy" option

All replies (1)

[ Posted:2015-11-30 12:40:03 ]

need programmer

fatih35m

hello
motorola MC9S08AP32 and ap64A　MC9S12Q128
ST72F324B
which programmer required all MCU eeprom and flash read and write do
The ISP feature
thanks

Last post : Re:need programmer	Reply: fatih35m
isp mode ok write ok read ok??

All replies (6)

[ Posted:2015-11-23 00:00:22 ]

VP-980 won"t work

Matthias

Hi!

I have a VP-980 and i have long time not used.
Now, the software doesn"t recognize the programmer "Initializing failure" I can"t install the Driver, it says "unknown Device" in the Windows device-Manager. LPT does not work too!
Both LED"s on the VP-980 are green!

I use Win7 x64.

Any ideas?
BR Matthias

Last post : Re:VP-980 won Reply: lxl Host

VP-980 do not support windows 64bit

All replies (1)

[ Posted:2015-11-23 17:19:09 ]

ADD

Erol

Hello, can you add flash ( KFG1G16U2D ). Thanks advance

Reply the message

[ Posted:2015-11-19 19:51:05 ]

MX25L6406E

carmati

Hi.
I have a problem with reading, writing memory MX25L6406E.I have a VP-590

Last post : Re:MX25L6406E	Reply: lxl
please send error photo to weilong@weilei.com.cn

All replies (1)

[ Posted:2015-11-06 07:49:49 ]

MBM29xl12df

tom

Hello. I have a problem with the correct record of Fujitsu mbm29xl12df. Programmer is vp996. Please help.

Last post : Re:MBM29xl12df	Reply: tom
I sent email

All replies (2)

[ Posted:2015-11-03 02:25:57 ]

VP-890

aiman said register

hi
　please add PIC32MX250 please

Reply the message

[ Posted:2015-10-30 03:46:00 ]

series number error

choo

My VP_390 Programmer have the series number error,what should I do?

Last post : Re:series number error	Reply: lxl
please run c:\weilei\wellon\wellon_reset.exe

All replies (1)

[ Posted:2015-10-25 15:56:14 ]

28F128J3C read/write problem

rus5404

I have a problem with reading, writing flash memory 28f128j3c, BGA64. When I bought the VP 996 programmer, everything worked perfectly, and while there was the programming of the chip, the programmer flashing blue LED. I do not remember when it started, but now I can read, write the chip only in the slow read/write mode. I thought it was my faulty chip, but I recently bought a new 12 pieces, but the problem still the same.

[ The message is modified by rus5404 ]

Last post : Re:28F128J3C read/write problem	Reply: lxl
I see your video,you use elder software.

All replies (7)

[ Posted:2015-10-21 03:02:27 ]

VP-890

aiman said register

hi
　please add PIC32MX250

Reply the message

[ Posted:2015-10-25 21:14:40 ]

TMS370C722NT read ok - buffer empty

reed

I have a problem with reading TMS370C722NT chip. I bought Vellon VP996 and adapter WL-DIP40-M238. When i trying read this chip everything is fine. Software told me Read: OK but buffer is epmpty.
This chip not have read protection.
Why buffer is empty? How to properly read this chip?

Last post : Re:TMS370C722NT read ok - buffer empty	Reply: reed
I sent message for Your e-mail.

All replies (5)

[ Posted:2015-10-13 21:41:05 ]

read secure bits on P87c52SBAA

cvbnm

How to read and reset the "secure bits" on P87c52SBAA MCU with Wellon vp 480 programmer?

Last post : Re:read secure bits on P87c52SBAA	Reply: lxl
sorry, cannot read

All replies (1)

[ Posted:2015-10-12 18:45:59 ]

wellon vp-890

aiman said register

Hi
Please Add S25FL164K — 64 Mbit (8 Mbyte) vp890

Last post : Re:wellon vp-890	Reply: lxl
please download new software.

All replies (1)

[ Posted:2015-10-07 02:36:25 ]

VP-280 - buggy support for 25AA512

infatrus

Something "s wrong with 25AA512 support in VP-280 programmer - when reading data from chip with VP280, the output differs from data I got when reading with other programmer (Xeltek SP3000).
Chip was of course the same and Xeltek output is proper one.

Last post : Re:VP-280 - buggy support for 25AA512	Reply: lxl
this is maybe

All replies (3)

[ Posted:2015-09-25 17:26:33 ]

AM29F040B 32 plc Program Fail

kyo

Hello! In Vp590 show program fail i´m try program device AM29F040B*32plc. Change retry to 25 but no resolve. Use last software version.Please help me.

Last post : Re:AM29F040B 32 plc Program Fail	Reply: lxl
please use another chip to try.

All replies (1)

[ Posted:2015-10-01 19:55:37 ]

wellon vp-890

aiman said register

Hi
Please Add S25FL164K — 64 Mbit (8 Mbyte) vp890

Reply the message

[ Posted:2015-10-01 16:43:51 ]

AT29C020 on VP-880

anpesnc

Hi,
I have a VP-880 and apparently I can read succesfull a AT29C020, but I can"t write.
It start programming and stop at 0xFF showing buffer and chip data at that address are different.
I have tried several times with 2 new memories and have the same issue.

Please help.
Thanks

Last post : Re:AT29C020 on VP-880 Reply: lxl Host

maybe your programmer is bad.

All replies (6)

[ Posted:2013-02-27 23:02:28 ]

vp-280 programer trouble

prezi

I have problem with vp-280.
Programer trouble id: 01EB74C313000081 .
Can anyone help me fix this?

Regards

Prezi

Last post : Re:vp-280 programer trouble Reply: lxl Host

please send email to weilong@weilei.com.cn

All replies (1)

[ Posted:2015-09-22 02:53:57 ]

Diver VP-190

Carlos

Hello
I have a VP-190 do not own the installation driver.
Please link where I can download it.

Last post : Re:Diver VP-190	Reply: lxx
http://www.weilei.com.cn/dow.asp

All replies (1)

[ Posted:2015-09-16 23:26:30 ]

VP-390 USB Driver

Frikkie

I urgently need a usb driver for the VP-390 for Windows 8.1

Last post : Re:VP-390 USB Driver	Reply: lxx
If you have install the new wellon software, usb driver has install. If your system is 64 bit system,it is in C:\weilei\wellon\usbsys64.If your system is 32 bit system,it is in C:\weilei\wellon\usbsys.

All replies (1)

[ Posted:2015-09-17 19:32:22 ]

gp"20

heiderberg register

hello can you help me how to test the tc5516ap

Last post : Re:gp	Reply: lxl
please download new wellon software (Ver. 4.6.6)

All replies (1)

[ Posted:2015-09-15 22:49:51 ]

KFG1G16U2D-HIB6

Erol

Hi friends,
i have "Wellon-VP896" and i want to read and write NAND FLASH and KFG1G16U2D-HIB6. Is there an option to read it as another Nanda flash with the same characteristics.

Thank you guys. :)

Reply the message

[ Posted:2015-09-15 18:29:41 ]

Wellon turned to chinesse, PLEASE HELP!!

JOE

HI, I downloaded and instaled the new update for ma VP990 and it turned CHinesse (I chose of course English on instalation) HELP!!!
What can I do?
No mather what I do its still in chinesse!
I restarte PC, uninstalled wellon few times, then instaled again, and tried chosee polish as well, no help still in chinesse!

Last post : chinesse.... Reply: JOE registered

yes v4.6.5 ITS NOT FAULT, PROGRAM AFTER INSTALATION IS COMPLETE IN CHINESSE no mather what languague I choose in instalation. after go back to V.4.6.2 - all is OK in english.

All replies (2)

[ Posted:2015-09-10 18:05:05 ]

Update software to 4.5.5 now Chinese

mamejay

Hello.　i have updated the VP-390 software to 4.6.6 and now all menus are appearing as Chinese.　How can i change back to English please?

Reply the message

[ Posted:2015-09-12 13:34:59 ]

ADD FUJITSU MB91F061BS MCU

dippy

I have the WORKING VP990 plz add MB91F061BS MCU

Last post : Re:ADD FUJITSU MB91F061BS MCU	Reply: lxl
we have not its programming specs.

All replies (2)

[ Posted:2015-09-01 17:10:25 ]

latest software version does not work

benaknoun

Hi
I downloaded the latest software version from the download section ( 28.08 ) and it does not work, it shows ?????? on all the screen.
I had to uninstall and use an old version

Last post : Re:latest software version does not work	Reply: lxl
please download again.

All replies (1)

[ Posted:2015-09-01 06:32:58 ]

Windows 10 VP990

benaknoun

Hi guys
I have the VP990 working on my Windows 8.1 perfect.
I"m thinking to update to Windows 10, will the software work ?
is it compatible ?

Thanks

Last post : Re:Windows 10 VP990 Reply: lxl Host

wellon software is same,maybe usb driver install incorrect.
you need reinstall usb driver.

All replies (3)

[ Posted:2015-08-31 04:47:55 ]

VP 480 programmer and WL- PL284468-370 a

cvbnm

I have a VP 480 programmer and WL- PL284468-370 adapter. I need to read P87c52SBAA MCU. How do I do with this adapter? When I try to read MCU pin shows a bad contact.

Last post : Re:VP 480 and WL- PL284468-370 a	Reply: lxl
WL- PL284468-370 is Special adapter, only support TI 370 series chips

All replies (3)

[ Posted:2015-08-23 16:36:22 ]

MB91F061BS MCU

dippy

HELLO MY DEAR ADMIN
I USE VP99O PLZ ADD MANUF- FUJITSU MB91F061BS MCU
I NEED ISP PROGRAMMING

Last post : Re:MB91F061BS MCU	Reply: dippy
plz add wellon programmer ,This new chip plz add

All replies (2)

[ Posted:2015-08-18 22:58:18 ]

P87c54sbpn

asturcor

>>Load File OK! Time:04/02/2015 12:36:53
>> 0,00Sec

>>.Auto Program......
>>.Blank Check......
>>.Program......
>>Device Address:00000000H　Device Data:FFH　Buffer Data:02H
>>Auto Program fail!
>> 0,56Sec
----------------------------!

Last post : Re:P87c54sbpn Reply: lxl Host

maybe the chip is secured.

All replies (1)

[ Posted:2015-08-18 20:03:10 ]

VP-596

asturcor

Hello
help with problem VP596 programmer.
chip P87C54SBPN
Error
>> Load File OK! Time: 04/02/2015 12:36:53
>> 0,00Sec
>>. Auto Program ......
>>. Blank Check ......
>>. Program ......
>> Device Address: 00000000H Device Data: FFH Data Buffer: 02H
>> Auto Program fail!
>> 0,56Sec
----------------------------!

Reply the message

[ Posted:2015-08-19 14:28:00 ]

language

asturcor

Why they not update the language and add Spanish
Programmer VP-596

Reply the message

[ Posted:2015-08-18 20:09:04 ]

VP-890

aiman said register

Hi
Please Add
PIC32MX320F032H　　　PIC32MX320F064H　　　PIC32MX320F128L
PIC32MX320F128H
PIC32MX340F128H　　　PIC32MX340F128L
PIC32MX340F256H
PIC32MX340F512H*
PIC32MX360F256L　　　PIC32MX360F512L
PIC32MX420F032H
PIC32MX440F128L　　　PIC32MX440F128H
PIC32MX440F256H　　　PIC32MX440F512H
PIC32MX460F256L　　　PIC32MX460F512L

Reply the message

[ Posted:2015-08-16 04:39:16 ]

VP-590

milreparos register

NÃO CONSIGO PROGRAMAR WINBOND W25Q64BVS1G

Reply the message

[ Posted:2015-08-15 14:53:08 ]

Support request

markoco

Can the Technician add support To the VP996　 for this chip AE801 its a 8 pin surface mounted chip　I be leave this chip is made in China

Picture of the Chip

[ The message is modified by markoco ]

Last post : Re:Support request	Reply: markoco
I look all over can not find the data sheet i thought you maybe can locate since you deal with all device manufacturer

All replies (2)

[ Posted:2015-08-13 05:53:25 ]

Read SIP3LCI - 6430800320600 13/47 NBTV

conouy

hi friends ..

I need read this chips bga ... model　SIP3LCI - 6430800320600 13/47 NBTV

what socket need ?
I have wellei VP-896 ..

sorry not have datasheet --only have picture..

http://200.55.240.45/descargas/NBTV.sip3lci.jpg
please help
thz .... bro.

[ The message is modified by conouy ]

Last post : SIP3LCI -　13/47 NBTV	Reply: conouy
ok thz ..

All replies (4)

[ Posted:2015-08-14 06:11:49 ]

my　wellon vp-2A+ is not communicating

sundayabah register

hi,　i have a wellon vp-2A+ USB the driver version is 3.9.4 i have installed but when ever i launch it its not communicating with my system it always
prompt me on the page that programmer initiate failure, programmer in demo mode. how can i resolve this because i need to urgently program my atmel controller. thanks

Last post : Re:my　wellon vp-2A+ is not communicating	Reply: lxl
maybe your programmer is bad.

All replies (2)

[ Posted:2015-08-13 20:57:29 ]

programming a bipolar prom

rsebinger

I have a vp-490 programmer and a friend needs to have a real old MMI/AMD Prom 63LS141. This is a 16 pin DIN and is a 1980 vintageIC . Can I program this device with VP-490

Last post : Re:programming a bipolar prom	Reply: lxl
VP-490 don"t support it.

All replies (1)

[ Posted:2015-08-12 06:51:09 ]

Reading the EEPROM

Subrat Sahu register

I have Weilon VP280 Programmer. Can the contain of data in EEprom of PIC
microcontroller, read with this programmer.

Last post : Re:Reading the EEPROM	Reply: lxl
vp280 "s software have stop update.

All replies (1)

[ Posted:2015-08-12 01:28:41 ]

vp-990 and s29gl512nxxFFIR2

kedzior12

HI
Problem in the programming and reading　s29gl512nxxFFIR2
other chip is programmed correctly
previously worked fine

slow program/red　selected
>>.Verify......
>>Device Address:01500001H　Device Data:FFFFH　Buffer Address:02A00002H　Buffer Data:FEFFH
>>Verify fail!
>> 57,18Sec

help

[ The message is modified by kedzior12 ]

Last post : Re:vp-990 and s29gl512nxxFFIR2	Reply: lxl
please download new software to try.

All replies (3)

[ Posted:2015-08-08 03:57:14 ]

wellon VP-890

aiman said register

Reply the message

[ Posted:2015-08-08 04:38:58 ]

Erase S29GL064NXXFFIS2

joerli

Hi;
I have an vp996 programmer, Can I erase a memory spansion S29GL064 with fuse lock protection?

Thanks

Last post : Re:Erase S29GL064NXXFFIS2 Reply: lxl Host

no

All replies (1)

[ Posted:2015-08-05 23:12:47 ]

MT29F4G16ABADAH4

fabiode

Boa tarde,nao consigo programar MT29F4G16ABADAH4, meu programador só me dá a opcao até MT29F4G16ABADAH4, o que fazer, meu programador é um vp-990, atenciosamente, obrigado.

[ The message is modified by fabiode ]

Reply the message

[ Posted:2015-08-06 02:46:09 ]

how to read 29f200/29f400

marcelot

hello mates, i need know how to read amd29f400bb or amd29f200bb , what adapter use if PSOP44 OR SOP44

WL-PSOP44-U001 OR WL-SOP44-U001

I HAVE PROGRAMMER WELLON VP390 ,
but when i select device amd 29f200b , say required adapter　WL -TSOP48-U002,,,, WHEN I WANT READ 29F200
THANKS

Last post : Re:how to read 29f200/29f400 Reply: lxl Host

VP-390 do not support sop44 package

All replies (1)

[ Posted:2015-07-31 22:24:56 ]

Total 1464,Total 30 pages

[<<][9][>>]

search: title content user

Web homepage | Contact us | About us

Tianjin Weilei Technology Ltd.

234.38 ms