Tianjin Weilei Technology Ltd.

Homepage:Login:Register:Soul:Top Host

Forum style

Interface Style:

Total 1450,Total 29 pages

[<<][19][>>]

VP-490 K9F1G08U0B-PIB0 support

cream

Hello,

Any chance on supporting Samsung flash chip type K9F1G08U0B-PIB0 on VP-490 programmer?

BEst regards,
Mircea

[ The message is modified by cream ]

Last post : Re:VP-490 K9F1G08U0B-PIB0 support	Reply: jin
VP-490 can"t support so Large-capacity memory like K9F1G08U0B.

All replies (1)

[ Posted:2012-10-28 23:01:36 ]

ad29f400　　　vp-380

verica

first helow　i have vp-380 programmer i try to read　 29f400　psop 44 pin　but it doesent even start　to read　always give me like pin　1,2,3　and 43,44　not conectit　to　programer　 (i use adapter psop 44 check conection it is ok )　try same adapter same flash on　laBTOOL　work ok　whot is problem can you make it your softvare　to work on this flash or

Last post : Re:ad29f400　　　vp-380	Reply: jin
VP-380 can"t support the 29f400 psop44 pin, it only support it tsop48 pin.

All replies (1)

[ Posted:2012-10-30 02:05:11 ]

Wellon VP-490

Potiron

just received an brand new vp-490

when i try to program eprom like m27c322 or any other kind of eprom,just got an "auto program fail!"

what"s wrong?
thanks for your help

note that ac adapter is plugged in,give 9v but when i try self test,i can"t have exactly 3v (2.8)/12v(11.92)/25v(24.02) using my "standard st-3341 multimeter""

Last post : Re:Wellon VP-490 Reply: Potiron registered

hey!
just downloaded lastest,version,all is working perfectly (got an communication error at the finish but its ok when using another eprom)
thanks you all of you,you"re awesome!!!

All replies (11)

[ Posted:2012-10-16 03:02:56 ]

Can"t update vp-490

Infirmier

just got an vp-490
i can"t update firmware with lastest software version(doesn"t works at all)

So i used older one"s in the cdrom (4.4.0) but i"m still at firmware 16(everytime do an update but nothing change)

what"s wrong? thanks

Last post : Re:Can Reply: Infirmier registered

everything is working,thanks :D

All replies (2)

[ Posted:2012-10-21 22:20:53 ]

S29GL256P90FFSS7 x VP890

erika

Hello, I try to reprogram a bga64 s29gl256p90ffss7 but I have a trouble to full erase. Its possible make a full erase this flash ?
I use a s29glp90ffi01 from software 4.4.0 and firmware 11.0
Thanks

Last post : Re:S29GL256P90FFSS7 x VP890	Reply: jin
Please download our latest software, and do the system update.

All replies (1)

[ Posted:2012-10-21 06:59:40 ]

VP 890 not working BGA chip

qamarulislam register

my new programmer VP 890 not working mx29ga257 any body help me after install new software problem is still not resolve well on exe run demo mode ic no is available in list but run exe with VP-890 60% is is　hide

Last post : Re:VP 890 not working BGA chip	Reply: lxl
about mx29ga257,please download new soft. when run demo mode,please select correct programmer type.

All replies (1)

[ Posted:2012-10-20 01:53:23 ]

VP-298 Lost Firmware

altzone

Hi
I have a VP-298 and it seems to have lost it"s firmware while doing the system update function from the software.
I tried shorting JP1 as per the instruction manual, and the Blue LINK LED lights, but the sofwtare no longer recognises the programmer or does the firmware update.
Any suggestions?

BTW, is the VP-298 the same as the VP-290? Because there is hardly any mention of the 298 on the Wellon website.
Thanks
Dave.

Last post : Re:VP-298 Lost Firmware Reply: Potiron registered

the vp-290 is totally different
and sorry but the vp-298 isn"t supported anymore

All replies (1)

[ Posted:2012-10-16 10:55:23 ]

29f32g08cbaca

fabiano

preciso ler e gravar 29f32g08cbaca mas no software do vp990 não tem, o que fazer?, obrigado.

Last post : Re:29f32g08cbaca	Reply: jin
The two chips are NAND flash. They have too much capacity, we can"t support them.

All replies (2)

[ Posted:2012-07-17 10:15:06 ]

Intel 28F320 - VP890

guliver

Hello, I have a trouble to erase locked flash Intel ebga64 28F320j3
Isn"t there a way to unlock it? The chip is Ok, but not possible to reprogram,
Tks

Last post : Re:Intel 28F320 - VP890	Reply: erika
Hi, I have the similar trouble. I try erase various locked intel BGA64 - 28F320 , with Vp890,　erase only adress from 0000 until 3DFFF0 , and from 3E0000 until 40000F not erase. I use a UP2008 its works 100%. The chip is Ok.I want use Wellon.　Any solution ? Thanks

All replies (2)

[ Posted:2012-10-05 14:49:17 ]

WELLON VP-890

aiman said register

Hello, I have a trouble to 34hf1601b [tsop48]

Last post : Re:WELLON VP-890	Reply: jin
What"s trouble? [ The message is modified by jin ] [ The message is modified by jin ]

All replies (1)

[ Posted:2012-10-11 08:05:22 ]

Reading Test vectors in JED file ?

Running the software in demo mode, I can select PLDs but the JED
load does not show the vectors ?
Q: Can the VP290/VP390/VP590 be able to read vectors within the JED file, like other programmers.
This is a summary of correct Vector support :
1) Vectors should read within JED read
2) Edited vectors should save with JED information.
3) Vector Test should be in Auto-List
4) Vector test should have user Vcc define
vectors:
*V0001 01111X111N0HHHHHHHHN
*V0002 C1111X111N0HLLLLLHHN

Last post :

Re:Reading Test vectors in JED file ?

Reply: jg registered

Confirming new update 4.5.1 fixes these issues

* Can now load　CUPL Vector information
* Vector limit has increased to 3000, from 100.
　 (loading is slow, but for < 3000, it works)
* "K" inverted clock support has been added.

All replies (4)

[ Posted:2012-10-03 16:01:06 ]

vp-990

aiman said register

GMS81516BT　　　　　　　　　　　　
　　 GMS81516BT　　　　　　　　　　　
　　 GMS81516BT　　　　　　　　　　　　
　 GMS81524BT　　　　　　　　　　　　
　　 GMS81524BT　　　　　　　　　　　
　　 GMS81524BT　　　　　　　　　　　　
　 GMS82524T　　　　　　　　　　　　　
　　 GMS82524T

Last post : Re:vp-990	Reply: lxl
soft is updated

All replies (1)

[ Posted:2012-08-18 07:59:18 ]

Software 4.5.1 Bug

guliver

I update the software to 4.5.0 and 4.5.1. When read the eprom give a error message " Note!Firmware Ver is lower,please update! my Wellon is VP890 and firmware is 11.0,

Last post : Re:Software 4.5.1 Bug	Reply: lxl
please run "Help"--> "System Update".update firmware to 17.0

All replies (1)

[ Posted:2012-10-06 04:15:29 ]

vp-290 problems

Potiron

i just buy an vp-290 which rocks

BUT

i don"t understand why i can"t program eprom like NEC D27C40960 or equivalent when you can do it whith an vp-280(older) wich is compatible with less composant

it is a way to update the compatible list of the vp-290 ? thanks!

by the way,if i want to program an ST M27C322,which adapter should i buy?

Last post : Re:vp-290 problems Reply: lxl Host

VP-390/590/990

All replies (3)

[ Posted:2012-09-29 20:18:52 ]

my vp290 does not work with windows 7

carmen

My pc has a cpu Intel (R) Core (TM) 2 DUO and a Windows 7 Ultimate.
VP290 does not work. When I start, I find a message that says:
Programmer initializing failure, possible causes:
1.- Programmer is not connected to USB or Parallel por port properly.
2.- Programmer power suply not connected
3.- Reconect USB cable pressing Retry or star the software again.
The programmer mode says: Communication error!

What I must do?

Last post : Re:my vp290 does not work with windows 7 Reply: Potiron registered

hello
did you install the software before or after plugged the programer in the usb port?

All replies (3)

[ Posted:2012-08-18 05:58:56 ]

GP-20 IC support

capital

I have Gp-20 purchased few days back from vega robot mumbai india .I cannot select EEPROM　, H27U518 series as it is doesnot appear when I am usint "SELECT" and typing　H27U..... .I think it is not included in the actual list of the programmer .But before purchasing this programmer I had checked on the web site regarding H27U518 series and Gp-20 was the model advised by the Weilei site. I request you to update the program so that I can use EEPROM H27U518 series as it is most urgent.

Last post : Re:GP-20 IC support	Reply: lxl
please update your software.GP-20 supports H27U518

All replies (1)

[ Posted:2012-09-29 20:14:25 ]

vp-380 ic support

praveen

hello i have wellon v-380 programmer. Its not support winbond 25Q80BVAIG & also mx25l8005PC-15G what can i do please give the sollution

Last post : Re:vp-380 ic support	Reply: lxx
TTL&CMOS cann"t read.You can select 7490 or 7493 to test.

All replies (3)

[ Posted:2011-11-08 18:14:14 ]

atmega 88v

mawlcs

Dear friends with all due respect I use this programmer makes about three years now and never had a problem with this chip only after the rise of the firmware to 17 and who had this problem.

Last post : Re:atmega88v	Reply: Messi
this problem we have solved ,Please download the latest software

All replies (1)

[ Posted:2012-09-26 22:22:48 ]

Atmega88v

mawlcs

After these latest updates"m not getting more ATMEGA88V record of always communication error, what should I do to solve this problem.

Last post : Re:atmega88	Reply: Messi
Please download the latest software tomorrow or the day after tomorrow [ The message is modified by Messi ]

All replies (2)

[ Posted:2012-09-26 04:33:32 ]

looking for chip programer

henrysantiago11 register

hi guys,
i need a chips programer for ST
M29W640FT

http://imageshack.us/a/img543/2465/m29w640ft.jpg

that can read/write etc. including socket.
just pm me the details
henrysantiago11@yahoo.com
or call me +639267043888
thanks,

Last post : Re:looking for chip programer Reply: cm registered

Hello！
The programmer VP-590 is the cheapest programmer that can support your chip.I am sorry, I didn"t know which company can supply program service in philippines.

All replies (3)

[ Posted:2012-09-18 21:37:42 ]

Ic spansion s29gl256pxxffss7

mawlcs

Hello good afternoon I live here in Brazil and I have a Vp990 and would like to write to flash Spansion s29gl256pxxffss7 and it is not listed, is there any possibility to include this component in the list, since many thanks and await response.

Last post : Re:Ic spansion s29gl256pxxffss7	Reply: jin
You can choose S29GL256PxxFFI01 to try.

All replies (1)

[ Posted:2012-09-26 04:24:18 ]

Atmega series by MOSI/MISO

kisslorand register

Can you add ISP programming for the Atmega series by MOSI/MISO?

Last post : Re:VP-390 isn	Reply: Messi
Please tell us the specific chip model

All replies (1)

[ Posted:2012-09-26 04:04:21 ]

dead vp 990 after update fail

marcin

hi, just tried update wellon after switch off on goes off, power adapter is working fine just no signs of live from vp 990

Last post : Re:dead vp 990 after update fail	Reply: marcin
chapter 3.7 solved problem uff... :) thank　you

All replies (1)

[ Posted:2012-09-22 03:19:51 ]

isplsi1016 or pLSI1016

ltihi

Hi guys, I need program pld pLSI1016 with VP590, I can read and erase it, but when begins to program it, not program nothing.
I use the adapter WL-PL44-U1
I hope someone help me!!!
Thanks in advance

Last post : Re:isplsi1016 or pLSI1016	Reply: ltihi
Working now again...excellent! Thanks a lot for your support!

All replies (5)

[ Posted:2012-09-14 20:02:24 ]

just a question

daddy

is this true
VP890 or VP990. ( They are the same, VP990 is export version)

Last post : Re:just a question	Reply: cm
Hello! No,the software can distinguish programmer automaticlly.When you didn"t link the progrmamer, you can look at the device list of VP-990. But when you link the programmer, the software will distinguish the programemr VP-890. Enen though you use the English language, it is VP-890.

All replies (5)

[ Posted:2012-09-11 09:40:08 ]

want to buy wellon programmer

balkrishan register

hi dear

i am from india(chandigarh) and i want to buy WELLON VP 280 programmer. where is the best place and price

regards
balkrishan

Last post : Re:want to buy wellon programmer Reply: cm registered

Hello!
The programmer VP-280 have stopped production. You can select our other programmer. Please browse our website, and select the programmer according your need.

All replies (1)

[ Posted:2012-09-11 12:14:49 ]

vp280

sstorana

Can the vp280 program a M27v322 eprom? Cant seem to see it in the list.　John

Last post : Re:vp280	Reply: cm
Hello! The programmer VP-280 have stopped production. The software have stopped update.If you can find the chip in the list, the programmer didn"t support it.

All replies (1)

[ Posted:2012-09-11 16:16:26 ]

PROBLEM PROGRAMING FL;ASH TYPE BGA

s@parator

programmer VP890 my problem .programing flash type BGA
SERIES m28w320fts/fsu/hsu ETC.

>>Initiating, Please wait...

>>Programmer initiate success!
>>Load File OK! Time:2012-03-11 14:26:18
>> 0,02Sec

>>.Auto Program......
>>.Erase......
>>Device Address:00000000H　Device Data:0000H　Buffer Data:0000H
>>Auto Program fail!
>> 14,00Sec
----------------------------!

The following lines in drivers/mtd/chips/cfi_cmdset_0001.c are suspicious:

#if !FORCE_WORD_WRITE
{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL },
#endif
{ CFI_MFR_ST, 0x00ba, /* M28W320CT */ fixup_st_m28w320ct, NULL },
{ CFI_MFR_ST, 0x00bb, /* M28W320CB */ fixup_st_m28w320cb, NULL },

There are several issues:

1.　The documentation lists the chip ID as 0x88ba/0x88bb, not 0x00ba/0x00bb.　A
vendor based a patch for the M28W640 part on these lines and it was indeed
broken because of the zeroed high bytes.

2. The fixup_st_m28w320ct function zeroes cfi->cfiq->BufWriteTimeoutTyp, but
fixup_use_write_buffers tests it first because it is earlier in the array.　So
fixup_use_write_buffers should be moved to the end I think.

3. Knowing next to nothing about MTD, I am not clear on what "top" vs. "bottom"
parts are all about.　The card I am using does not have both.　Only one of the
M28W320 fixups is clearing cfi->cfiq->BufWriteTimeoutTyp -- should they both do
that?

Joe Buehler

[ The message is modified by s@parator ]

Last post : Re:PROBLEM PROGRAMING FL;ASH TYPE BGA	Reply: jin
B4-1-402 Hi-tech innovation base，No.16,the 5th Haitai Development Street Huayuan Industrial Park, Hi-tech Industrial Zone, Tianjin ,P.R.C,300384　 Tianjin Weilei Technology Ltd. P.R.China

All replies (12)

[ Posted:2012-08-10 02:55:00 ]

VP680 not program 29LV651UE

bmw320d

Hi guys, I need program memory 29LV651UE with VP680, I can read and erase it, but when begins to program it, not program nothing.
There"s a solution for this problem, in the software program there"s this memory, I use the adapter WL-TSOP48-U1
I hope someone help me!!!
Thanks in advance

Last post : Re:VP680 not program 29LV651UE	Reply: jin
You can download our software Ver4.2.0. If it still program failed, you can select the option "Slow Program/Read" to try.

All replies (1)

[ Posted:2012-09-01 16:56:12 ]

s29gl064n90ffis2

guliver

Hi, I have a VP890 and I need to programm a Spansion flash model s29gl064n90ffis2, what similar chp works ? Thanksp　　　　　　　　　　　　　　　　　　　　　　

[ The message is modified by guliver ]

Last post : Re:s29gl064n90ffis2	Reply: jin
You can choose the chip type "S29GL064NxxFFI02" to try.

All replies (1)

[ Posted:2012-09-02 00:10:02 ]

WELLON VP-890

aiman said register

Hi , I have a VP890 and I need to program a Spansion ebga MB90F394H

Reply the message

[ Posted:2012-09-01 07:04:12 ]

WELLON VP-890

aiman said register

Solution is required to shake the flash and thanked

http://imageshack.us/photo/my-images/542/wellonvp890.png/

Reply the message

[ Posted:2012-08-31 06:48:29 ]

Cant write flash M29W160ET

vellon user register

Hello, i cant write bin file in M29W160ET TSOP48 ST manufacturer. I use VP590 with WL-TSOP48-U1, i can read, compare, erase ic but cant write. Here is picture and have that trouble

http://imageshack.us/photo/my-images/89/pictureofprogrammerorna.jpg/ any help??

Last post :

Re:Cant write flash M29W160ET

Reply: vellon user registered

Solved, im attach "slow program/read" all work perfectly

best regards

All replies (1)

[ Posted:2012-08-25 18:40:18 ]

VP-890 question

ciariello

Hi guys, could be possible UPGRADE the VP-890 to read/write chip with a capacities greater than 4GB? Today we often find chips with capacities greater than 4GB and it would be nice to manage them.

[ The message is modified by ciariello ]

Last post : Re:VP-890 question	Reply: cm
Hello! Please tell me your chip name.

All replies (1)

[ Posted:2012-08-15 18:32:31 ]

Windows 7 64-bit driver is unsigned

Razor68

I can"t install the USB driver as it"s unsigned.　When will there be a signed driver available for Windows 7 64-bit?

[ The message is modified by Razor68 ]

Last post : Re:Windows 7 64-bit driver is unsigned	Reply: Razor68
.Thanks! The driver issue is fixed in version 4.4.0 for 64-bit.

All replies (2)

[ Posted:2012-08-03 23:54:02 ]

VP-480, programming M27C322

masto

Hello, i am trying to programm ST M27c322 with the VP-480 (SW 4.2 - last version) under Win XP. The problem is, that it seems to programm only until the adress 1FFFFFh - from 200000h till 3FFFFFh all data is just FFh. All smaller ones seems to work perfect, for example 27c160 (000000h-1FFFFFh) is working perfectly fine. What i am missing here? Any setting i should change or is my VP-480 maybe defective? Thanks in advance for your help!

[ The message is modified by masto ]

Last post : Re:VP-480, programming M27C322	Reply: masto
Working now again...excellent! Thanks a lot for your support!

All replies (9)

[ Posted:2012-08-09 15:29:26 ]

AT90S1200 fuse settings

Fastah

I found bug in software. When select AT90S1200, Config screen, fuse settings popup SPIEN RCEN is too narrow... can"t read RCEN option is enabled or disabled.

Please correct this.

Thank you

[ The message is modified by Fastah ]

Last post :

Re:AT90S1200 fuse settings

Reply: Fastah registered

Now working...

Thank you

All replies (4)

[ Posted:2012-07-25 04:43:10 ]

CY7C293A blank check on VP980

Fastah

Hi
I found bug in software (latest and older). When Blank check on blank eprom CY7C293A program say:

>>.Blank Check......
>>Device Address:00000000H　Device Data:FFH　Buffer Address:00000000H　Buffer Data:FFH
>>Blank Check fail!
>> 0,02Sec
----------------------------!

Chip was realy blank, program read all FF and checksum is 0007F800
Please correct this.

Thank you

Last post : Re:CY7C293A blank check on VP980 Reply: Fastah registered

Hi
Now everything works fine...
Thank you

All replies (15)

[ Posted:2012-07-25 04:35:23 ]

VP-190 Confusion....

marc.hull

Sirs.

Please help with a couple of issues.

1) Your documentation states that the VP-190 can test DRAM and SRAM but I cannot find a way to do this.　The DRAM/SRAM button is inactive. How can it be done ?

2) When testing 14 pin logic chips there is a pop up on the software stating some pins need to be jumperd.　The text states that these are pins 31 and 32 but the picture shows pins 27 and 28 highlighted.　 So which is it　?

Last post : Re:VP-190 Confusion.... Reply: cm registered

Hello!
The programmer VP-190 is only sell in China.So there is not instroduction in the web. You can download the newest software in English. The software can distinguish the programmer automacticlly.
About jumper, we have modify the software, we modify the demo picture in the software,but when the user test them, you also need jumper as the software.

All replies (3)

[ Posted:2012-07-29 10:16:21 ]

vp-590

Marcos

vp-590 windowns does not recognize the drive
Error after system update, what to do

Last post : Re:vp-590	Reply: lark
Please enter WELLON software, click ‘Help’->’Contents’, read chapter3.7 Error message ,’ If your programmer that had the function of update online lost its program, you can resume it’, do as what follows.

All replies (1)

[ Posted:2012-08-03 05:55:14 ]

VP-990

farhad

Hi. your new software dos not work for test uln2001,2,3 ...uln2803,4.... and maybe other devises !! this is really not good for you and your software team　!!!!!

Last post : Re:VP-990	Reply: lxl
please download new soft.

All replies (1)

[ Posted:2012-08-01 04:49:09 ]

wellon vp -380

bharat

when i select the ic name (w39v040fapz) it shows w39v040fap*32 pl
or 32ps
what is the difference between these two

Last post : Re:wellon vp -380	Reply: lxl
w39v040fapz is lead free.

All replies (1)

[ Posted:2012-08-01 17:11:00 ]

Vp-390 not working after failed update

zige

Hi.

My vp-390 no longer works after a failed system update.
I get no lights and when plugged in to my computer it says usb device bot recognized. Is there a way to recover from a failed update? If not would I be able to send this in for repair?

Thanks

Last post : Re:Vp-390 not working Reply: hlark registered

Please enter WELLON software, click ‘Help’->’Contents’, read chapter3.7 Error message ,’ If your programmer that had the function of update online lost its program, you can resume it’, do as what follows.

All replies (1)

[ Posted:2012-07-30 17:55:22 ]

VP-390 Need update for PSOP44

M.Y.Perf

Hello i have just buy a wellon VP-390
and they didn"t work with the psop44 ( AM29F400BT)
they say my it"s a 48pin but it"s a 44pin
please help me
thanks

Last post : Re:VP-390 Need update for PSOP44	Reply: lxl
VP-390 only support TSOP48 package,do not support PSOP44 package.

All replies (1)

[ Posted:2012-07-30 22:34:24 ]

29F400BC support and adapter question

benaknoun

Hi
I have the VP990 programmer
I would like to read this chip:
F Malaysia 29F400BC-70-Y
Does it support this chip? because i can"t see the name of manufacturer in list
Which adapter do i need for this chip?

Thanks

http://i1152.photobucket.com/albums/p496/appleaccessories/IMG_5346Medium.jpg

Last post : Re:29F400BC support and adapter question Reply: jin registered

Your programmer update failed. Please do the "system update" one more times. Please click "Help"-->"system update" and then according to the notice step by step.

All replies (11)

[ Posted:2012-07-01 08:38:49 ]

Buffer - new functions

kruPL

I"m user VP-990 programmer.
I want dump the contents of my buffer to plain txt file　(not via pdf creator, files converter etc.).
Example (address, data, ascii)
000000　 00 00 00 00 78 21 E0 1C 18 1E 00 00 00 00 00 00　....x!Ó.........
Is it possible to add function:
*direct dump buffer to notepad or clipboard or txt file
*GoTo address in BufferEditor　?.

[ The message is modified by kruPL ]

Last post : Re:Buffer - new functions	Reply: kruPL
I"ve found a solution. I use Generic/TextOnly printer (page size 285*285mm). Now I can go to the Editor, and print on virtual text printer (save to text file).

All replies (2)

[ Posted:2012-07-25 20:12:35 ]

VP-280

Roy

I noticed the Mfg and Device ID values are not read correctly when I use my VP-280 with a SST 39SF040-70-4C-PHE.

Last post : Re:VP-280	Reply: jin
You can change another chip to try.

All replies (1)

[ Posted:2012-07-21 00:28:03 ]

S29GL256P90FFSS7

guliver

Hi , I have a VP890 and I need to program a Spansion ebga64, S29GL256P90FFSS7, It´s possible ? Can I use other model from software ? Tks

Last post : Re:S29GL256P90FFSS7	Reply: lxx
Please select S29GL256PxxFFI01 and try.

All replies (1)

[ Posted:2012-07-17 09:22:02 ]

VP990 and NAND HYNIX H27UBG8T2ATR

xerius

Hi! Could you add NAND HYNIX H27UBG8T2ATR to my programmer?
Datasheet HERE
Thank you!

Last post : Re:VP990 and NAND HYNIX H27UBG8T2ATR	Reply: xerius
ok. i send email.

All replies (5)

[ Posted:2012-07-13 14:08:09 ]

vp-990

aiman said register

Are vp-990 able to put the chips Basoord and delete with an explanation of the steps and Thank you

Last post : Re:vp-990	Reply: lxx
Sorry. Basoord? I don"t understand that you say.

All replies (1)

[ Posted:2012-07-13 04:43:58 ]

Total 1450,Total 29 pages

[<<][19][>>]

search: title content user

Web homepage | Contact us | About us

Tianjin Weilei Technology Ltd.

187.50 ms