Tianjin Weilei Technology Ltd.

Homepage:Login:Register:Soul:Top Host

Forum style

Interface Style:

Total 1450,Total 29 pages

[<<][23][>>]

Information for s29gl256p90ffss9

mawlcs

Hello, good afternoon I"m in need of information of Spansion Flash s29gl256p90ffss9, and what use to write to adapitador vp990, since the same is available in the list.

Last post : Re:Information for s29gl256p90ffss9	Reply: jin
If you have the datasheet of s29gl256pxxffss9, please send to us. If you didn"t have it, you can choose s29gl256pXXffI01 to try.

All replies (3)

[ Posted:2011-09-09 04:25:25 ]

Problem with my VP180

F4CNY

The vp had problems of connections and I followed chapter 3.7 and to the end when I want to read one 27512 it indicates: Programmer trouble!ID: 005EBE044545B68C
What"s happen ?
Thanks for your answer !
F4CNY

Last post : Re:Problem with my VP180	Reply: hlark
Sorry, I just find that VP-180 doesn"t have the function of updating, sothe programmer needs repairing,you can send back to us.As I said before,you may afford the upkeep costs and carriage round trip.

All replies (7)

[ Posted:2011-09-25 04:37:39 ]

VP-280 USB driver

ryjia

i have lost my VP-280 USB driver, where can i download?or who can send the driver for??

thanks
raymond

Last post : Re:VP-280 USB driver Reply: cm registered

When you setup the software in the computer,the USB driver have setup in the software.Usually, When you link the USB line, the computer can detect it , and the USB driver can setup automatic. If it can"t setup automatic, you can select setup yourself. The path is C:\weilei\WELLON\usbsys.

All replies (1)

[ Posted:2011-09-26 14:48:23 ]

top3000 programmer error

maruti9151 register

when i select ic　AM29F400BB , THE MESSAGE APPEAR THAT
""　can not find fpgastring of sop44p29 """

please help me about this message

thanks

Last post : Re:top3000 programmer error Reply: lxl Host

sorry,TOP3000 is not our product

All replies (1)

[ Posted:2011-09-24 18:07:25 ]

VP-280 Fails Self Test and cannot write

JoeMay

I have a VP-280 that fails the self test and it fails on writing.
I can test logic chips, upgrade the system version and even downgrade the system version.
I was even able to do a blank check and that worked.

All read commands seem like they work, but I cannot write to any eprom.
a simple 27c256 fails.

I checked all three voltages:
5v = 3.73 low?
12v = 12.02
21v = 21.08

The self error test I am getting goes like this:
P31 input is high!
P5 VPP output is high!
P9 Vpp output is high!
P11 Vpp output is high!

etc...

Please advise!
Thanks,
Joe

[ The message is modified by JoeMay ]

Last post :

Re:VP-280 Fails Self Test

Reply: JoeMay registered

I will solder a new SS8550 on to V19 and let you know!

Thank you!
Joe

All replies (2)

[ Posted:2011-09-21 04:22:17 ]

VP-280 VP-380

user256

Hello How long will support the VP-280 and VP-380?
Maybe in the near future they will be replaced with new models?

Reply the message

[ Posted:2011-09-17 20:57:12 ]

se puede actualizar vp-590

ada

tengo un mc68hcp11a1fn de 52 pines pero el programador no lo tiene　se le podra agregar

Last post : Re:se puede actualizar vp-590	Reply: lxl
please use English

All replies (1)

[ Posted:2011-09-15 12:54:36 ]

VP-980

Alpha

I have a Wellon VP-980 and have problems mit two chips, 1.) FL032AIF, after delete blank check, i see on screen: Device Adresse:00036B00H, Device Data:C0H, Blank check fail!, 2.) FL064AIF, after delete blank check i see on screen Device Adresse:00000000H, Device Data:46H, blank check fail. Please help, thenks.

Last post : Re:VP-980	Reply: cm
When you program the chip FL032A and FL064A, please modify the Algorithm Parameters in the software. Please modify VCC from 2.5 to 2.7. I have test it. There is not any problem.

All replies (1)

[ Posted:2011-09-12 05:53:10 ]

ST62T25C on the VP490

eduardog

Last post : Re:ST62T25C on the VP490	Reply: jin
vp-590 can support ST62T25C.VP-990 can support ST62T62 and ST62T25C. [ The message is modified by jin ]

All replies (2)

[ Posted:2011-08-30 12:19:25 ]

vp890 send suport M28LV320FSU.

ss28

Please correct the IC ST m28w32fsu in the current version can only read it and can not be programmed is a serious mistake.

Last post : Re:vp890 send suport M28LV320FSU.	Reply: jin
we only support M28W320FSU. Because we can"t find the datasheet about software unpretect of M28W320FSU, now we do not support Software Protected chip.We only support new chips.

All replies (1)

[ Posted:2011-09-12 14:24:00 ]

VP280 29f032 support

Is there any possibility to add AM29F032B to the supported device list of the Wellon VP 280?

Last post : Re:VP280 29f032 support	Reply: lxl
VP-280 can not supports 29F032 because hardware

All replies (1)

[ Posted:2011-08-28 14:05:43 ]

VP490 and SAMSUNG k9f5608u0c

cream

Hello,

Do you plan on support Flash chip Samsung k9f5608u0c on programmer VP-490/590?

Here"s the IC datasheet:

http://pdf.dzsc.com/200810211/200809270448356178.pdf

Is it the same with k9f5608u0d because this one I found on supported device list.

Regards,
Mircea

[ The message is modified by cream ]

Last post : Re:VP490 and SAMSUNG k9f5608u0c	Reply: eduardog
The VP490 It already have the ST65T65, it is posibe to add the ST65T25C

All replies (6)

[ Posted:2010-12-15 23:14:38 ]

where to buy WL-ISP-U1 ?

a3639

where to buy WL-ISP-U1 adaptor to work with VP-880/890 . Tks

Last post : Re:where to buy WL-ISP-U1 ?	Reply: cm
This adapter didn"t sell alone. It is accessories of VP-880/890. it is sell with VP-880/890

All replies (1)

[ Posted:2011-08-22 23:57:21 ]

The absence of definitions INTEL

JAMYL

I have a programmer GP20. VP990 and We have a programmer from another TYPES. ELNEC. LABTOOL48UXP.We know very well you are doing tremendous effort to occupy the forefront.And you are now in the lead.No. 63000 chip was good for the process of global .Please origin had to add the definitions of Intel chips for the company the kind of SPI. Here is the link to the DATASHEET.　　　　　　　　　　　　　　　　　　

http://www.datasheetdir.com/QB25F320S33B8+8MB-FLASH.

Last post : Re:The absence of definitions INTEL	Reply: cm
We will add this chip later.

All replies (2)

[ Posted:2011-08-19 22:32:19 ]

Difference between GP-2 and GP-20

Illia

Hello.　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　 What difference is between GP-2 and GP-20? Does GP-2 support english? Can i work with GP-2 abroad of China?　Can i program chip with sockets TSOP-28,　TSOP-32, TSOP-40, TSOP-48 by means of adapter TSOP-56. Thanks.

[ The message is modified by Illia ]

Last post : Re:Difference between GP-2 and GP-20	Reply: cm
The device quantity of GP-20 is more than GP-2.GP-2 can support English.About the adapter TSOP28/32/40/48/56, these are different adapter. Their width are different.

All replies (1)

[ Posted:2011-08-20 04:11:45 ]

Problem Programing M28W32fsu.

separator

Please add the following layout code M28W320fsu ST.
August programmed arrangement of long and, in addition to errors
http://img847.imageshack.us/img847/9638/errorm28w320.png

[ The message is modified by separator ]

Last post :

Re:Problem Programing M28W32fsu.

Reply: separator registered

LINK.

http://pdf1.alldatasheet.com/datasheet-pdf/view/117516/STMICROELECTRONICS/M28W320FSU.html

All replies (9)

[ Posted:2011-07-30 21:55:38 ]

MSM514400 (DRAM)

woskal

I use VP-890, and want to test OKI DRAM MSM514400. But, this number is not in the support list. Can you propose a part number (DRAM) that have the equivalent specification, may be i can use jumper wire manually jointup & test with my VP-890!
Thank you.

Reply the message

[ Posted:2011-08-22 19:49:57 ]

SST 27SF256 burn error

grafix

Brand new chips.
VP-280 , old soft, new soft, the same reaction.
Can burn ...... :(

http://imageshack.us/photo/my-images/830/vp280sst27sf256fail.jpg/

? help

[ The message is modified by grafix ]

Last post : Re:SST 27SF256 burn error	Reply: jin
We can"t buy the new 27SF256, so can"t test it. Please send us a chip to test.

All replies (3)

[ Posted:2011-08-18 14:37:39 ]

The absence of definitions INTEL

JAMYL

Please, I find WELLON of the finest programmers the world. But the absence of definitions Intel does not know why neglected. With it"s use in many markets. Origin had to add this chips please . QB25F016S33B and QB25F160S33B and 320 and 640 and KH25FXXXX

Last post : Re:The absence of definitions INTEL	Reply: cm
Please tell me your programmer type. Besides, if you can,please supply these chip datasheet.

All replies (1)

[ Posted:2011-08-19 08:41:15 ]

"write fig file err" update

sekoserwis register

Atfer i update VP-890 and restart system software show "write fig file err" when i wanna run program. Please help

Last post : Re:	Reply: lxl
please update again.

All replies (2)

[ Posted:2011-08-10 21:05:02 ]

Actel A1020B-PG84C

Plankton

I own the VP20 programmer and would like to run a blank check on pn: A1020B-PG84C. Can you add coverage for this Actel part?

Last post : Re:Actel A1020B-PG84C	Reply: lxl
sorry,we do not find its programming Algorittm.

All replies (2)

[ Posted:2011-08-04 23:49:30 ]

PROM MB7138H support on VP-280

tga44fr

Hello,

Could you add support to read/dump PROM such as MB7138H on your VP-280 device ?

2048*8

　 +--\/--+
A7 |1　 24| Vcc
A6 |2　 23| A8
A5 |3　 22| A9
A4 |4　 21| A10
A3 |5　 20| CE1/
A2 |6　 19| CE2
A1 |7　 18| CE3
A0 |8　 17| O7
O0 |9　 16| O6
O1 |10　15| O5
O2 |11　14| O4
GND|12　13| O3
　 +------+

Fujitsu　 : MB7137E, MB7137H, MB7138E, MB7138H

http://mameitalia.net/wiki/index.php/PROM

Thanks a lot !

Last post : Re:PROM MB7138H support on VP-280 Reply: lxl Host

VP-280 do not support PROM

All replies (1)

[ Posted:2011-08-03 03:38:12 ]

VP990 attiny25 SELFPRGEN.

Voy

Hi.

I have VP-990 Programmer. In my project i need to program attiny25 and disable fuse SELFPRGEN in this microcontroler. Unfortunately, for each read microcontroller programmed SELFPRGEN is always enable. The remaining configuration bits can be programmed without any problem.

What causes this error?

Thanks for help.

Last post : Re:VP990 attiny25 SELFPRGEN. Reply: lxx registered

About fuse SELFPRGEN, its programming is right.But its reed has bug.
We had modify software. Please download new software tomorrow.

All replies (1)

[ Posted:2011-08-01 13:41:29 ]

VP990 Device

farhad

hi. DM74s288 & MACH111 for VP990 plz.

Last post : Re:VP990 Device	Reply: cm
We didn"t have program information of MACH11. The programmer didn"t support DM74S288. About the chip HCS512, we will suppor this chip.

All replies (3)

[ Posted:2011-07-21 01:10:12 ]

Can my VP-890 test MSM514400?

woskal

Please add MSM514400 (DRAM) for me. Thank you!

Reply the message

[ Posted:2011-07-30 04:22:53 ]

vp-280 fails to program gals

zubatto

I use the vp-280 to erase and program the fuse map on the gal, any .jed file I write in the gal16v8d will be result in 111111111111111111 is my device broken?

Last post : Re:vp-280 fails to program gals	Reply: lxl
not select "secure"　on "Edit Auto"

All replies (1)

[ Posted:2011-07-27 18:56:27 ]

WL-EBGA64-P30

scuba2day

I would like to buy a VP490/Vp590 and the WL-EBGA64-P30 adapter. However, looking at the pictures the connector on the adapter is two 40 pin dula inline and the programmer is a DIP48. Is this the correct adapter?

Last post : Re:WL-EBGA64-P30	Reply: jcsmith23
If you use a chip or adapter that uses fewer pins than the socket has you just insert it starting at the bottom and leave the topmost ones empty.

All replies (3)

[ Posted:2011-07-23 03:09:38 ]

how to copy and record Nand Flash Sansum

Clodoaldo Padilha register

I"m having trouble copying a NAND FLASH SANSUMG K9F1G08U0C.

nand I have a good working and want to burn the files it in another nand flash.
I"m not getting more, because the memory of destination has three bad block, already used the function of skip bad block, it writes the memory appears "Program OK" does not work more as a result. Help me, step by step please.

Last post : how to copy and record Nand Flash Sansum Reply: jin registered

You must use nand flash have no bad block. If the nand has some bad blocks, the operation will fail.

All replies (1)

[ Posted:2011-07-26 06:21:44 ]

LH28F128BFHED-PWTL90 VP-990

MatygaD

Hi
Plase add support for LH28F128BFHED-PWTL90 TSOP48 for VP-990.
Datasheet:
http://datasheets.pl/L/LH/LH28f128bfhed-pwtl90.pdf

Best Regards
Darek

Last post : Re:LH28F128BFHED-PWTL90 VP-990 Reply: MatygaD registered

Hi
New version support this chip:)
Thank"s for add it
Best Regards
Darek

All replies (2)

[ Posted:2011-06-22 20:37:33 ]

kasierty123

kocias234

I have a VP 990, can I read/program motorola MC9S12DG128　112 pin via SPI ???

Last post : Re:kasierty123	Reply: gxj
vp-990 can support mc9s12dg128.

All replies (1)

[ Posted:2011-07-24 05:32:40 ]

Rotated eeproms programming.

erniez

Hello, what is possibility　of programming s2914 (93c46 rotated pin)?
Can i do my own routing for adapter?
I"m using vp990

normal chip is

8 7 6 5
- - - -
- - - -
1 2 3 4

rotated is

6 5 4 3
- - - -
- - - -
7 8 1 2

[ The message is modified by erniez ]

Last post : Re:Rotated eeproms programming.	Reply: cm
Please supply the datasheet of S2914 rotate pin.

All replies (1)

[ Posted:2011-07-21 18:27:43 ]

Problem erasing winbond w24c040p

mutasim215 register

I have VP-280,s/w ver:4.3.2, it is working very well ,but when I

tried to program w24c040p,I can read and save the file from the

original one,but can not erase the blank one,i got (erase fail)

massage,so please help me.

An other problem facing me with atmel at89c52 microcontroller,

working in a turnstile,I can not program a blank one because of

the lock bits,have you a solution that can crack it.

Thanks & regards.

Last post : Re:Problem erasing winbond w24c040p Reply: cm registered

The chip 24C040 didin"t need to erase. You can program this chip directly.About AT89C52, Please erase the chip, and then program it.

All replies (1)

[ Posted:2011-07-20 20:37:36 ]

Can"t program PIC10f206 in VP990

Willy

I can not pogram the PIC10F206 (sot23-6) verification fails every time. When i try to read chip, every second time it is reading another values at the first 5 words (and maybe in some　another places)
exapmple:
1"st read: 47 00 00 08 70 0F 43 0D 00 08
2"nd read: 00 00 80 00 82 00 36 06 43 06
3"rd read: 47 00 00 08 70 0F 43 0D 00 08
4"th read: 00 00 80 00 82 00 36 06 43 06
5"th read: 47 00 00 08 70 0F 43 0D 00 08
...
The values are completly differnet from programmed values.

Last post : Re:Can	Reply: lxl
please try using another chip or try the chip using other programmer.

All replies (4)

[ Posted:2011-07-17 04:29:26 ]

vp-890

herson

i just bought vp-890, my goal is to read and copy ic eeprom 25L4005C 8pin, but i cannot select the model from the list, please help me solve this problem

Last post : Re:vp-890	Reply: cm
Please select MX25L4005A, and program it firstly. I will add the MX25L4005A in the software. Please download the newest software later.

All replies (1)

[ Posted:2011-07-11 19:11:05 ]

VP-280 window popup meaning

Jw7734

When I select Intel 2764 I get a pop-up picture of the socket that is labeled "Pins map" and has a picture of the socket with buttons "STOP" or "CONTINUE"
The pin indicators are different colors - white, red, and green.

What does this mean?

Thanks.

Last post : Re:VP-280 window popup meaning Reply: cm registered

I think,maybe you set the chip in the socket with error position. Or it is poor touch up between the chip and the adapter or socket.

All replies (1)

[ Posted:2011-07-11 21:28:47 ]

VP 180

F4CNY

Hi !

Is it possible to upgrade VP180 for programming the 27C4100 ?
Thanks for your answer

Best regards

Last post : Re:VP 180 Reply: lxl Host

sorry,VP-180 can not support it because hardware.

All replies (1)

[ Posted:2011-07-07 03:09:35 ]

HD64F3644P adapter

eLAB

Hi,

need to read out HD64F3644P.It`s in list of supported devices (VP-990) but I can`t see pinout for adapter.
Can You send me schematic for adapter so I can build it?

P.S. Buying of adapter is not an option because I need it just for one MCU (I mean job).

Can You help?

[ The message is modified by eLAB ]

Last post :

Re:HD64F3644P adapter

Reply: eLAB registered

O.K. Thank You for answer.

Best regards,
Dejan.

All replies (2)

[ Posted:2011-07-04 21:12:28 ]

vp-990

mrbrasil

Hi I can not write ATMEGA88 with vp-990 and new software of this error
2200-0FFFFFFFF800FFFFFFFFFFFFFFFFFFFF
2210-FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
2220-FF000000000000000000000000000000

does not erase everything and not delete LockBits tbem

Last post : Re:vp-990 Reply: lxx registered

2200H-2220H is used for config word.

All replies (1)

[ Posted:2011-06-30 08:28:46 ]

S25FL032P

separator

please add to the treaty Flash programmer VP-790 BGA S25FL032P ..
link..
www.spansion.com/Support/Datasheets/S25FL032P_00_05_e.pdf

[ The message is modified by separator ]

Last post : Re:S25FL032P	Reply: lxl
sorry VP-980 have stop updated.

All replies (8)

[ Posted:2011-05-07 19:26:31 ]

motorola MC68HC711 MPU on VP280

bsw

I have a VP 280, can I read/program motorola MC68HC711 MPU ???? it"s in a 40 pin dip housing

[ The message is modified by bsw ]

Last post : Re:motorola MC68HC711 MPU on VP280	Reply: lxx
We don"t support MC68HC711.

All replies (1)

[ Posted:2011-06-22 01:32:10 ]

VP380 VP280 not support ATMEL AT49LV040

smile2011

I bought 2pcs VP380 and 2pcs VP280. Product code: 6944209 000055 (VP380) and 6944209 000062 (VP280). I need add device Flash EPROM ATMEL AT49LV001 AT49LV002 AT49LV040 AT49BV001 AT49BV002 AT49BV040 with package type TSOP-32 and VSOP-32.

Last post : VP380 VP280 not support ATMEL AT49LV040	Reply: jin
The vp-380 has already supported these chip with package type VSOP32, but it can"t support the TSOP32.

All replies (1)

[ Posted:2011-06-11 13:08:44 ]

VP380 & VP280 not support AMD AM29F200

smile2011

I bought 2pcs VP380 and 2pcs VP280. Product code: 6944209 000055 (VP380) and 6944209 000062 (VP280). I need add device EPROM AMD AM29F200BB AM29F400BB AM29F800BB with package type PSOP-44.

Last post : Re:VP380 not support AMD AM29F200	Reply: lxl
sorry VP380/280 don"t support PSOP44 package chip!

All replies (1)

[ Posted:2011-06-11 13:05:21 ]

VP890 & mbm29LV160BE

naingwin

I have vp890 programmer.I can erase MBM29LV160BE .But can not program
this IC.I have used update soft or old soft,but can not program.erase ok.Pleas check your soft.

Last post : Re:VP890 & mbm29LV160BE	Reply: naingwin
All OK now,using slow program & read.thank jin

All replies (2)

[ Posted:2011-06-06 01:30:26 ]

VP-280, select with ActiveX error 429

tga44

Hi,

I just bought my VP-280. The installation was OK on my PC (WinXP Pro).　The program runs fine. Selftest says that everything is OK.

However, when I click on "Select", I got the error message "vp3slt, runtime error 429, the activeX component cannot create the object". So I get no selection windows and the programmer cannot be used.

I downloaded your latest version 4.3.2(03/06/2011) and get the same error. I tried google but didn"t find any solution.

Thanks for your help

Thierry

Last post : Re:VP-280, select with ActiveX error 429 Reply: tga44 registered

I found the solution to fix the ActiveX error 429.
You need to run a Microsoft utility program : "Microsoft Office 2000/Windows 2000 Registry Repair Utility". You can download it from the Microsoft website here.
Simply run this exe file and your registry will be cleaned to let the Wellon program run fine.
I hope it will help other persons.

All replies (4)

[ Posted:2011-06-08 05:58:13 ]

wellon vp490 not work

abuuauto

hi, please l have wellon vp 490 it was work fine since l change pc　it not　work it show　write　file conf error and it　show on light blue if l connect usb . it nothing eeprom on connecter .l try to change usb still same　voltage it fine from adapter 9v .please any help.thanks

Last post : Re:wellon vp490 not work	Reply: lxl
try use another pc

All replies (1)

[ Posted:2011-06-08 15:07:09 ]

WELLON VP-280

raz410

HI,I JUST PURCHASED A WELLON VP-280 THE UNIT WAS WORKING FINE UNTIL I TURNED IT ON TODAY (I MADE NO ADJUSTMENTS)I AM NOW GETTING THIS MESSAGE(WARNING PROGRAMMER TROUBLE)1.THERE ARE DEVICE ON THE SOCKET 2.THE PROGRAMMER"S SOME FUNCTION IS DISABLED (WARNING: DEVICE PROGRAM MAYBE FAIL.I CHECKED MY POWER CONNECTION AND USB CONNECTION ALL GOOD.I EVEN LOADED THE PROGRAM ONTO MY LAPTOP COMPUTER AND I STILL GET THE SAME WARNING MESSAGE.ANY HELP WOULD BE GREAT

Last post : Re:WELLON VP-280	Reply: lxx
The programmer is saled in China, it is only enjoy the warranty in China. If you can not contact with Ebay"s business, you need pay all freight. C26 is 331.But it do not effect communication. You"d better select computer"s USB port on board (it is in the back of computer ),clean all USB port and try again.

All replies (19)

[ Posted:2011-03-02 23:42:09 ]

wellon 590

tas_daz

i have take the wellon vp 590 and when read the st95160 eprom and then i save or i write again the file is biger tha 2048kb that is the original and i write like 2064kb?write at the end another one line the end is 800 and goes 810 and i delete the last line.it is ok?or it is wrong?what i can do?

Last post : Re:wellon 590	Reply: cm
When you read or write the data, you needn"t delete the last line data. You can save or load the file normally. The program can run normally.It didn"t effect the result.

All replies (6)

[ Posted:2011-05-17 03:09:10 ]

vp480 not program the PIC16F84A

cvbnm

I have vp480 but he does not programming PIC16F84A.WHY?
Thank you !

[ The message is modified by cvbnm ]

Last post : Re:vp480 not program the PIC16F84A	Reply: lxl
maybe your programmer need repair.

All replies (7)

[ Posted:2011-05-01 15:54:54 ]

ATtiny2313 on VP980 failed (part2)

Fastah

Hi
That"s ok but now is problem at address 00... into hex file is 3A but programmer write 1F... verification ignore this first byte and say OK but this first byte was changed to 1F and my project do not work. When I program same chip in another programmer, they program all bytes OK (include first) and project wok properly.
Please fix it.

I open new topic because can"t reply on first...　topic exceeds 40 words. :-)

Thank you

Last post : Re:ATtiny2313 on VP980 failed (part2) Reply: lxx registered

Please use the newest software or 4.2.0 vertion software.And select ATtiny2313 again.Please notice "Cal bufferaddr." Set it "FFFFFF".

All replies (3)

[ Posted:2011-04-30 18:33:08 ]

read from a chip　showing nonsense

kunmy

i bought a wellon vp 280 programmer about a month ago, and just open it for usage today,after i load the chip and then try to read the program out of the chip it shows read okay, but on opening the hex file with notepad i get something like this,(the chinese looking things like a corrupted file) i need help on what to do

Last post : Re:read from a chip　showing nonsense	Reply: lxl
chip type?

All replies (1)

[ Posted:2011-04-29 09:33:15 ]

Total 1450,Total 29 pages

[<<][23][>>]

search: title content user

Web homepage | Contact us | About us

Tianjin Weilei Technology Ltd.

171.88 ms