Tianjin Weilei Technology Ltd.

Homepage:Login:Register:Soul:Top Host

Forum style

Interface Style:

Total 1450,Total 29 pages

[<<][21][>>]

vp-490

busbus

I have mrb vp-490, but lost cd pc, but do I want to rebuild collapsed.

Last post :

Re:vp-490

Reply: cm registered

Helo!
Usually, if the chip have config program function, the software will add extra 16byte automatically, and save the config data in it. So you can look at extra line.
If you didn’t save the config data in the file. When you save the data, you can modify “To Buffer Addr” and “Buffer Size” in the ”Save Buffer To A File” window.
If the chip didn"t have config program function, there is not extra line.

All replies (6)

[ Posted:2012-03-05 19:52:39 ]

VP-490 file extra line?

PierreTheron register

Why does Vp 490 read an extra line ans save it .

On every chip i did a read it gives an extra line .

This counts for all eeprom　i did read off.

I even did update on software and still the same problem .

I attach a jpeg file to explain my problem .

(((How do i attach a file from my computor on here?????

If some one knows how to attach easy way it will be helpfull..

Last post : Re:VP-490 file extra line? Reply: cm registered

Helo!
Usually, if the chip have config program function, the software will add extra 16byte automatically, and save the config data in it. So you can look at extra line.
If you didn’t save the config data in the file. When you save the data, you can modify “To Buffer Addr” and “Buffer Size” in the ”Save Buffer To A File” window.
If the chip didn"t have config program function, there is not extra line.

All replies (3)

[ Posted:2012-03-21 06:34:55 ]

VP280 can read but not write/erase

Fruitcake

My VP280 can read but not write/erase. All devices work with other programmers so I know VP280 is faulty.Tried Wellon 4.3.4 (and older) on multiple PCs. VP280 firmware 9.0. All self-tests run ok and all VCC/VPP voltages are ok.
Firmware upgrade: Link LED flashes green 3 times, G/E LED is off, Wellon hangs.Tried J1 (short J1, connect USB, run Wellon) but cannot communicate with VP280. Link LED is off, G/E LED is red.
I cannot see obvious faults inside. Can you suggest any components to replace?

Last post : Re:VP280 can read but not write/erase	Reply: hlark
The carriage is about 55 to 80 us dollars by FED from China to UK.

All replies (8)

[ Posted:2012-03-14 23:11:49 ]

vp-280 error

jeffcayme

i can"t program, read, verify, etc... "programmer trouble!ID:128A089C2DC96ED4" is appearing. but when i click "self-test" it says　"system test OK!" i checked the VCC, VPP, its all good. please help me with this　　 issue. i only used my vp-280 for 2 days, thank you.

Last post : Re:vp-280 error	Reply: hlark
The maintenance costs is 10 to 70 US dollars,according to the bad device model;and the carriage is about 66 to 90 us dollars by FED from China to saudi arabia.

All replies (14)

[ Posted:2012-03-06 04:43:30 ]

Vp-280 not supported in latest ver.64bit

pppppppp

Hi.I had the program version form late 2011. Everything worked fine. I desided to update to the latest version by downloading it from the website. After uninstall of old version and install of newest version I can not ID eproms. Error message says it"s unable to use database from older version. Also VP-280 not in the list of devices if I start program without vp-280 connected and press ignore. I run Win7 64-bit.

Last post : Re:Vp-280 not supported in latest...	Reply: pppppppp
Found version 4.3.3 online. Removed everything called Wellon i registry. Installed 4.3.3. Works again.

All replies (4)

[ Posted:2012-03-13 02:35:50 ]

VP-490 PIC12C508/P04

hemvlett

My VP-490 can"t erase a PIC12C508-04/p. The　"erase" icon is disabled.

Thanks.

Last post : Re:VP-490 PIC12C508/P04 Reply: hemvlett registered

...So it"s a good reason!!! ;)
Thanks

All replies (2)

[ Posted:2012-03-09 08:05:23 ]

Intel DT28f320s3110 programming failed

cream

Hello,

I have a problem programming intel flash chip DT28F320S3110. First I had error at erasing but after I updated software today, ERASE/READ is OK but programming failed. Please help. I have a VP-490 programmer.

Last post : Re:Intel DT28f320s3110 program failed Reply: jin registered

Please connect the AC adapter first. And if it still failed, you can choose "Slow Program/Read" to try.

All replies (1)

[ Posted:2012-03-06 00:13:53 ]

A290021T and VP-590 - no erase

DevoDave

I"m using VP-590 with sortware version 4.3.2 for Windows 7 32bit. I can read the chips OK, but cannot erase.　The erase process takes 250 seconds or so, but the blank verify always fails.　Reading the chip then shows the same original data.　What"s wrong?

[ The message is modified by DevoDave ]

Last post :

Re:A290021T and VP-590 - no erase

Reply: DevoDave registered

Good news... the chip erases!

Bad news...　the program times out after 50 to 80 seconds and reports "Needs AC Adapter" and gived a "communications error".

(But at least the chip erases!)

All replies (18)

[ Posted:2011-06-10 14:40:55 ]

VP-390 PIC16F73

nathan

I have found another chip that does not work with this programmer.
I cannot erase a PIC16F73.

>>Man.Code:29　 Dev. Code:60　
>>.Erase......
>>.Blank Check......
>>Device Address:000000H　Device Data:0047H　Buffer Address:000000H　Buffer Data:3FFFH
>>Erase fail!
>> 0.77Sec

Please fix.
Version 4.3.4(17/02/2012) Software
Version 15.0 Programmer Firmware
I am running Windows 7 64bit.

Last post : Re:VP-390 PIC16F73 Reply: lxx registered

Please download the new software.

All replies (2)

[ Posted:2012-02-29 19:27:27 ]

ST 93S46 insertion test problem

benaknoun

Hello
All the chips 93S46, when i try to read, insertion test says the pins are not connected properly, all the other chips like 24C04 and 93C56 are OK, only this model 93S46 always the same, it says the contacts are not connected properly
Can you fix this issue please?

Thanks

Last post : Re:ST 93S46 insertion test problem Reply: cm registered

Hello!
I think your chip is not standard chip, the chip pin is whirling. Please select the chip 93C46CX, and try it.

All replies (1)

[ Posted:2012-02-29 04:38:46 ]

Vp890 = Vp990

guliver

Hello, The Wellon Vp890 same Vp990 ? Or the device quantity　of VP-990 is more than VP-890 ?　Tks

Last post : Re:Vp890 = Vp990	Reply: cm
Hello.The programmer VP-890 only sell in China. The programmer VP-990 sell in oversea. The device quantity of VP-990 is more than VP-890.

All replies (1)

[ Posted:2012-02-28 01:31:07 ]

Windows7

mawlcs

Hello good day I"m still having a problem installing the software in the VP-990 windows7, I tried to install on other notebooks and also had no success it seems that the problem of software and compatibility with windows7, since in windows xp it works perfectly, I"m waiting for help in what you"ve done but not recommended solution.

Last post : Re:Windows7	Reply: cm
Hello. Our software can run in the windows7 64bit or 32bit. We test them in our software. There is not any problem.If it can"t run in your computer, please email wellon@weilei.com.cn, and tell your problem in details.

All replies (1)

[ Posted:2012-02-25 22:29:08 ]

Am29F010 with serctors protected

urupic

Hi. I have some Am29F010 flash memory with hardware sector protected. This not allow erase and program protected sectors, so the devices are in "read only" mode. I cant"t find any command in the software to do protect/unprotect sectors. I have Wellon VP-280 with last firmware. Is possible do it with this hardware?. Regards.

Last post : Re:Am29F010 with serctors protected	Reply: lxl
sorry,because hardware, VP-280 do not support to do protect/unprotect sectors of Am29F010.VP-590/990 support

All replies (1)

[ Posted:2012-02-25 09:45:29 ]

LINK blue light not ON !! VP990

benaknoun

Hi
Today, i wanted to use my programmer, connected it to my PC as usual, the blue LINK light does not come on, only the G/E light
What is the problem please?
It"s a new VP990 and i have only used it 5 times !!

I tried in my other laptop and tried another USB cable, same problem !

Let me know please

Here is a photo:

http://i187.photobucket.com/albums/x244/m3mpower/IMG_38641.jpg

Thanks

[ The message is modified by benaknoun ]

Last post : Re:LINK blue light not ON !! VP990	Reply: benaknoun
OK Thanks I will keep an eye on it

All replies (10)

[ Posted:2012-02-07 06:27:29 ]

vp490

sarkan

Sorry for previous post, it was my mistake. I want to know, if VP490 supports 29f400 PSOP44. Thanks for reply.

Last post : Re:vp490	Reply: lxl
support

All replies (1)

[ Posted:2012-02-24 18:35:11 ]

Am29F400BT PSOP44 on wp490

sarkan

What is the difference between vp490 and vp590? Does the vp390 support Am29f400PSOP44? Thanks. I know, that vp 590 supports it.

Last post : Re:Am29F400BT PSOP44 on wp490	Reply: lxx
VP-490 is only saled in China. VP-390 do not support Am29f400 PSOP44.

All replies (1)

[ Posted:2012-02-24 16:28:57 ]

isp1016E on VP990

psouzajr

Hi. I bought a VP990 and i"m trying to read a isp1016E from the ISP adapter but it always show me a message that there is no chip on the socket but if i invert the ISP cable on the VP990 conector, it shows me the screen with the terminals in ZIF conected... Am I doing something wrong?! OBS: there is a ISP conector on the board.

Last post : Re:isp1016E on VP990	Reply: lxx
We do not support 1016E"s ISP program.

All replies (1)

[ Posted:2012-02-23 18:35:10 ]

STM32F105 Read problem

kooroshi60 register

Hello everyone.

Is there anyone who can read the .hex or .bin firmware out of a
READ OUT PROTECTED Stm32f105 chip for me? I live in beijing and
have no problem for paying the payments.
Thanks guys.

Reply the message

[ Posted:2012-02-22 19:38:09 ]

Windows7

mawlcs

Hello, good evening someone can help me because I"m having trouble installing the updates on windows7, I can not install any because it removes the previous install and leaves no more, can someone tell me if you have any problems with this software, because I tried everything and failed. I look for help.

Last post : Re:Windows7	Reply: cm
Hello! Please download the newest software from our website, and try it.

All replies (3)

[ Posted:2012-02-20 07:21:14 ]

VP-390 PIC16F716

nathan

Hi,

I am getting an error when trying to program a PIC16F716. I have tried several different IC"s of the same type without success.
I can program OK on my TOP2004 programmer but my new Wellon VP-390 does not work with this IC.

Every second erase fails. Every write fails.

Please help fix this issue.

Last post : Re:VP-390 PIC16F716 Reply: nathan registered

The latest version has fixed the issue.
Thank you for your persistence.

All replies (12)

[ Posted:2012-02-13 19:16:16 ]

Windows 7 Wellon problems

cunami

Hy, today I tried to install wellon software on my pc. I have windows 7 and when I try to open wellon software an error comes. (run-time error"6": Overflow). I start the software combined with windows xp service pack 3 and 2, but there is still that problem. Please help me.

Last post :

Re:Windows 7 Wellon problems

Reply: benaknoun registered

Hi
Try to re-install the software from the download section of the website, and then install the USB driver if necessary

Good luck

All replies (2)

[ Posted:2012-02-14 20:42:24 ]

xc9572

elek

hi,
I try to program xc9572 plcc44
the erase is ok
program fail,
edit the xc9572 only numbers one
What could be wrong?
thank you.

Last post : Re:xc9572	Reply: elek
yes I was using xc9572 plcc44. Thanks.

All replies (2)

[ Posted:2012-02-11 13:32:03 ]

Am29F400BT PSOP44 on w390?

sarkan

Is it possible to read/write this flash eprom by this programmer? I just bought it and I am in doubt, if it will work. I have the correct adapter - PSOP44 U1. Thanks for reply.

Last post : Re:Am29F400BT PSOP44 on w390?	Reply: lxl
VP-390 do not support Am29F400BT SOP44 packaage

All replies (1)

[ Posted:2012-02-10 18:24:38 ]

Motorola MC68HC05 series

cvbnm

Is with wellon-WP480 possible read Motorola MC68HC05 series (MC68HC05B16)?

Last post : Re:Motorola MC68HC05 series	Reply: lxx
VP-480 don"t read MC68HC05.

All replies (1)

[ Posted:2012-02-07 19:26:59 ]

Wellon software crashes my computer

benaknoun

Hi
I have noticed that everytime i leave my VP990 connected to the computer, after a short time, the computer crashes and switches off by itself!
I have windows 7 64bit,

Any ideas what the problem might be ?

Thanks

Last post : Re:Wellon software crashes my computer Reply: cm registered

Hello,
Sometime, if the operation system have problem, the programmer can"t
communicate with computer normally.So please test the programemr with the other computer.If the result is OK, I think you have to install system again.If the result is error, Please run "self_test",and test the programmer and measure the VCC voltage.

All replies (7)

[ Posted:2012-02-03 08:01:51 ]

TTL/CMOS Tests All Fail on Good Chips

andymcg

Received Wellon VP-290 today.
My Software version 4.3.4 on Windows XP . Firmware Ver 5.0
Blue Link LED is lit, G/E LED is not lit.

Try to test CMOS CD4051BE but it fails every chip. I am testing known good chips.　I am using 4051 test. Tried other CMOS but they fail too.

After clicking Test -> TTL CMOS Test　a screen pops up that says "Pin Map. P27 and P28 have yellow color in box. Other boxes are white

What is wrong with my unit? .

Last post : Re:TTL/CMOS Tests All Fail on Good Chips Reply: andymcg2 registered

I have tested the programmer further and I have come to the conclusion that it is faulty. The self test is now intermittently failing. I am unable to program anything.
I am very disappointed in the quality of the product and support that I have received thus far.
I have returned the programmer to the individual I have purchased it from.

All replies (7)

[ Posted:2012-02-01 02:35:23 ]

Please add support for K6X4008C1F-GB70

Sr Plankton register

Can you please add support for K6X4008C1F-GB70 on the GP-20? I see you already have K6T4008C1.....

Thanks,
Fabian

Last post : Re: add support for K6X4008C1F-GB70 Reply: lxl Host

please download new soft late

All replies (1)

[ Posted:2012-02-07 05:44:24 ]

29F8100

jcsmith23

Hi, can you please add support for the 29F8100 family of chips to the software? I need support for the MX29F8100 44-pin SOP in the VP-890 specifically. Here is a datasheet:

http://pdf1.alldatasheet.com/datasheet-pdf/view/117357/MCNIX/MX29F8100.html

Thanks.

Last post : Re:29F8100 Reply: jcsmith23 registered

Hi, it seems to be working now. There seems to be a delay in how I can download the software. It is as if I always download 1 version back. I downloaded it today which should be the "2012-02-06" version but it shows up as 02-01 version in my software. I think there is some caching issue on the server.

All replies (3)

[ Posted:2012-01-31 04:19:06 ]

Problem with ST24C04W6 on VP990

benaknoun

Hello
I have a new VP990
I am trying to read a ST 24C04W6 SOIC8 chip placed correctly on the correct adapter, all i get is FFFFFFFFFFFFFFFFFFFFFF
I have placed the chip exactly the same way on my other programmer GQ-4X and it reads OK
I have tried with device selection of M24C04, M24C04-R, M24C04-W,
ST24C04, ST24C04-R
And it is the same problem, only get FFFFFFFFFFFFFFFFFFFF

What could be the problem please?

Can you help? thanks

Last post : Re:Problem with ST24C04W6 on VP990 Reply: benaknoun registered

Hi
As i said above, i have already downloaded, but on your homepage, software updates news, only shows the old version, i must go to "download" section to check!
Can we make the buffer editor window bigger or not?
And how often do you release software updates?
Thank you very much

All replies (6)

[ Posted:2012-01-31 05:12:59 ]

software vp990

mawlcs

Hello good evening I wanted to know if you like you include in the software 990 Vp the comparison function in automatic mode as functions of blank check to check and others.

Last post : Re:software vp990	Reply: cm
Hello!I am sorry, we can"t add the comparison function in the automatic mode. The verify function compare the chip data and the buffer data. So it needn"t add the comparion function in the automatic mode.

All replies (1)

[ Posted:2012-02-03 07:53:44 ]

ISPGAL 22V10

Adrian

Can support be added for ISPGAL 22V10 Programming?　 I can program normal GAL 22V10 but not ISPGAL 22V10.

Last post : Re:ISPGAL 22V10	Reply: lxl
sorry, we don"t find its programming algorithm.

All replies (3)

[ Posted:2012-01-27 06:38:02 ]

vp-480 and SST25VF032B

jaceksz

Hello
We have trouble with programming SST25VF032B on wellon vp-480.
Programming is interrupted after just 5-6 seconds with the message "ok", but the chip is empty ?

Last post : Re:vp-480 and SST25VF032B	Reply: lxl
please download Ver4.3.4 soft.

All replies (1)

[ Posted:2012-01-31 03:13:33 ]

PIC18F458 QFP 64

Dave

PIC18F458 QFP 64　This chip is not recognized by my VP-490 even though it is listed. I cannot read or write to the flash or eeprom section of this chip. Your configuration must be wrong.　　PLease help with this or I will return my programmer. It does not work or do what your company says it does.All I want to do is read and write hex data to this micro.

Last post : Re:PIC18F458 QFP 64	Reply: gxj
Please download the latest software.

All replies (1)

[ Posted:2012-01-31 06:45:20 ]

18F458 QFP

davecooper register

I programmed this chip but after I programmed I read the data back and at the bottom of the data in the ASCII column was the word "SORRY".　Doeas this mean the chip was protected and that I have damaged the data? Can anyone tell me please? Thank you.

Reply the message

[ Posted:2012-02-02 08:16:30 ]

18F458 QFP

davecooper register

I programmed this chip but after I programmed I read the data back and at the bottom of the data in the ASCII column was the word "SORRY"

Reply the message

[ Posted:2012-02-02 08:15:19 ]

PIC18F452

ikaRus

Hi,

The configuration for PIC18F452 in your software v4.3.3 is wrong.

The software says:
Size:F00100H * 8 (15M * 8)

This is wrong, this MCU is 32K flash device.

Please advise.

Regards.

D.

Last post : Re:PIC18F452 Reply: Dave registered

Is there anyway of reading the flash and eeprom data only of this chip. I dont want to risk overwriting any other part of the data?

All replies (2)

[ Posted:2011-08-21 15:57:20 ]

erase 35080v6

tatop

can i erase with WELLON VP-590 memory ST 35080-V6???
tanks

Reply the message

[ Posted:2012-01-31 19:32:27 ]

VP990 problem

benaknoun

Hello everyone
I have received my new programmer today, VP990 which i bought from an official distributor in Europe
Do i have to and how can i register for the guarantee?
Also, when i try to read a chip, always shows as chip blank FFF
i used my old programmer and it works ok
Any ideas please?
Thanks

Last post : Re:VP990 problem	Reply: lxl
yes, it is norma.l

All replies (22)

[ Posted:2012-01-07 08:20:45 ]

GAL26V12

picburner

Hello,
It would be technically possible to add the device GAL26V12 to the VP-380 programmer device list?
http://www.latticesemi.com/lit/docs/datasheets/pal_gal/26v12.pdf?jsession_id=f0304577afc027d0456718960c3465741261
Thanks.
Best regards.
Giampiero

Last post : Re:GAL26V12	Reply: lxl
sorry, our programmer do not support it.

All replies (1)

[ Posted:2012-01-23 15:44:57 ]

Problem with update.

mawlcs

Hello, good morning I would like to help one of you, I downloaded this last update but when I run the file does not let windows install, have tried everything and even uninstall the version I used before and do not let me install the new version, I use windows and seven assists a professional look forward your help, thank you.

Last post : Re:Problem with update. Reply: benaknoun registered

Maybe, right click, and run as administrator
You can try..

All replies (1)

[ Posted:2012-01-20 18:54:53 ]

VP990 Question

benaknoun

Hello
Is it possible to read/write a chip, for example 24C04 using a test clip directly on the chip / board, without desolder the chip
Or, do i have to desolder the chip?
Thanks

Last post : Re:VP990 Question	Reply: benaknoun
OK then, it is strange because on my basic universal programmer, it is　possible. The VP990 cost me 7 times the price of my basic pogrammer ( GQ-4X ) and it can"t read on board ?

All replies (4)

[ Posted:2012-01-07 22:05:45 ]

Problems with Vp280

MrNett

Hello since yesterday I have some Problems with my V280.The first problem ist that the software means that there ist a mistake during the initalisation of the epromer during the start of the software. I tried 3 Pc and always the same. I can ignore the mistake can sometimes work with the V280 ans somteimes not. A system Update does´nt make any change. the second problem is that the Software 4.30 doesn´t support the 27C1024 PLCC on the Vp280. with the 4.20 it is supported. Can anybody help me?

[ The message is modified by MrNett ]

Last post : Re:Problems with Vp280	Reply: lxl
software 4.3.3　support VP-380

All replies (7)

[ Posted:2010-07-07 16:55:19 ]

AM29F400BB 44 Pkege

autocrafts register

witch programmer suport AM29F400BB 44 Pkege

Last post : Re:AM29F400BB 44 Pkege	Reply: jin
VP-590 and vp-890. [ The message is modified by jin ]

All replies (1)

[ Posted:2012-01-19 01:58:58 ]

VP280 suport　In AM29F400BB

autocrafts register

How can i Program AM29F400BB 44pakage In VP280

Last post : Re:VP280 suport　In AM29F400BB	Reply: lxl
sorry,VP-280 do not support AM29F400BB 44pakage.

All replies (1)

[ Posted:2012-01-16 01:07:12 ]

VP-280 TROUBEL

ANDRZEJ

I have a problem with vp-280 attempts to read anything when I have a bug ID information; F68F0E9B2DC96EF8

[ The message is modified by ANDRZEJ ]

Last post : Re:VP-280 TROUBEL	Reply: mvp
Please operate it as follows, 　　 1 Link the JP1, and open the software, the programmer was initialed success. 　　 2 Open the menu "help", and select the "system update" 　　 3 Wait the programmer　"system update success", and then pull up the JP1,closed the software. 　　 4 Open the software again, the programmer was initialed success. 　　 5 Used the programmer normally

All replies (1)

[ Posted:2012-01-05 21:51:21 ]

29F080MC-70 trouble

vellon user register

Hello there,

I am owner of VP-590 model, today from one dvd player i take out sop44 on him writed 29F080-70, manufacturer is Macronix and when i try to read in buffer i see all zero but to end of dump i see FF can my VP-590 can read or cant that flash chip, dvd player is from my service and i can kill him isnt important but i try training and im erase him now dvd not work and im not read dump. Any sulution for help??

best regards

Last post : Re:29F080MC-70 trouble Reply: jin registered

Because of the hardware, vp-280 can"t support 29f400bb.

All replies (10)

[ Posted:2011-12-08 07:18:32 ]

Information for s29gl256p90ffss9

mawlcs

Hello good afternoon any hope of implementing ic s29gl256p11ffss9 for next year

Last post : Re:Information for s29gl256p90ffss9	Reply: jin
We can’t find the datasheet about this chip s29gl256p90ffss9.If you have the datasheet of s29gl256pxxffss9, please send to us. If you didn"t have it, you can choose s29gl256pXXffI01 to try.If you choose s29gl256pxxffi01 can write s29gl256p90ffss9 OK, we will add it later.

All replies (1)

[ Posted:2011-12-29 02:25:26 ]

VP280 and version 4.3.3

vr2yxt

After upgrade software to version 4.3.3, I cannot find VP280 in the device list for selection. It have VP-298. Can I use it for my VP280?

Last post : Re:VP280 and version 4.3.3	Reply: lxl
VP-280 can use the software

All replies (1)

[ Posted:2011-12-27 17:12:14 ]

VP-390 write fig file err

bubi21

Hi,I bought new vp 390 and installed software and drivers.When I start program ther is message:write fig file err.I have tryed to instal software from cd and yor page but no sucses.When I get message write fig file err and choose ignore on botom of the screen there is serialnumber of programer and it says comunication o.k

Last post : Re:VP-390 write fig file err	Reply: lxl
sorry,because hardware ,VP-390 do not support AM29F400BB psop44

All replies (3)

[ Posted:2011-12-25 09:03:51 ]

VP-280 fails to test HM2114 sram

JunoMan

I have tried to test a number of 2114"s including HM2114"s and they all have the same result. They pass the memory tests in the pcb they came from.

>>.Test(0)......
>>Test fail!
>> 0.48Sec
----------------------------!

Thanks
Chris

Last post : Re:VP-280 fails to test HM2114 sram Reply: lxl Host

sorry,VP-280 don"t support 2114 because hardware.

All replies (3)

[ Posted:2009-03-13 08:47:18 ]

Total 1450,Total 29 pages

[<<][21][>>]

search: title content user

Web homepage | Contact us | About us

Tianjin Weilei Technology Ltd.

187.50 ms