Tianjin Weilei Technology Ltd.

Homepage:Login:Register:Soul:Top Host

Forum style

Interface Style:

Total 1450,Total 29 pages

[<<][25][>>]

ic tester

raedhikmat register

can　add sn74121　in vp480　 in ttl cmos test ,regards

Last post : Re:ic tester	Reply: lxl
it is multivibrators, the programmer can not test it.

All replies (1)

[ Posted:2010-12-05 08:01:14 ]

USB driver

alpehut

are there anyplace i can download wellon vp880 usb driver
or better upload the driver to alpehut@gmail.com

i lost my cd whith this software.

regards
Julius Graskar

Last post : Re:USB driver Reply: cm registered

Please download the software in our website. The web is http://www.weilei.com.cn/dow.asp
please download the version 4.2.0　In the software, the USB driver is in the software.
[ The message is modified by cm ]

All replies (1)

[ Posted:2010-11-27 03:09:02 ]

AM29BDD160GT 80QFP

Karrom

i have VP - 880 ....Please add AM29BDD160GT 80QFP

Reply the message

[ Posted:2010-11-24 23:12:26 ]

NT68F63LG read and program

nippur

I have a VP-490 programmer, socket adapter (Plcc44 to dip44) and I would like to read and reprogram a Novatek NT68F63LG processor, but at every read I get different values, and almost all byte"s "FD".
I don"t know if this proc. read protected or I have other problem as I have no datasheet for the processor. I know that somewhere people can read and reprogram this processor with success.

Any idea?

Last post : Re:NT68F63LG read and program Reply: lxl Host

sorry, wellon programmer do not support unencrypted

All replies (3)

[ Posted:2010-11-12 00:51:46 ]

Please add Infineon SAK-TC1766-192F80HL

erniez

Hello I"m VP990 user and I would like to be able to program Infineon SAK-TC1766-192F80HL Microprocesorr. Please add it if you can.
Here is the dathasheet:

http://www.datasheetdir.com/TC1766+download
or

http://www.datasheetdir.com/SAK-TC1766-192F80HL+Microcontrollers-32bit

By the way I suggest you to make some option for lost password recovery as I had to register again.

Thanks.

Last post : Re: Reply: cm registered

The programmer VP-990 can"t support this chip.

All replies (3)

[ Posted:2010-11-02 18:58:33 ]

VP-290 and SRAM test

MJM

Hi,

Is it possible to test SRAM memory using VP-290 ? Web page says - yes,
but in program option in Select device is disabled.

Regards,
MJM

Last post : Re:VP-290 and SRAM test Reply: cm registered

The programmer VP-190 can"t support SRAM test.We have modify our webpage.I am sorry for this matter.

All replies (1)

[ Posted:2010-11-08 20:34:10 ]

VP-280 Doesn"t work

Richard

Hi,　we had a power cut, the Vp-280 was plugged into the mains and also the USB socket. When the program starts It nevers sees the programmer, sometimes I get "write fig file err" error message or the initialise bar　gets halfway.　I have tried re-installing the program and tried on another PC and can"t get it to work.Can I send it for repair? I am in the UK.

Last post : Re:VP-280 Doesn	Reply: lark
Please contact the Business from where you buy the programmer.If you　send it directly to us,We will not afford the round-trip freight,and　if the programmer out of one-year warranty,you need to pay maintenance costs.

All replies (6)

[ Posted:2010-11-02 19:51:45 ]

VP490 and Intel DT28F320S3

cream

Hello,

I have a VP490 programmer and I want to program some flash chips : intel DT28f320S3. The programming ended without a problem but when I try to use the flash chips on intended device, I get errors that the flash is read-only. I"ve checked with intel datasheet, and there is an option to lock the sectors/blocks. How can I check system parameters/configuration with the programmer to find out if the flash is locked or not?

Regards,
Mircea

Last post : Re:VP490 and Intel DT28F320S3 Reply: lxl Host

yes,programmer firmware not needs update.

All replies (5)

[ Posted:2010-10-27 15:18:54 ]

Vp990 and 29f64g08

krisszmix

Hello ! The VP990 it"s possible the 29f64g08 programming ? Many thanks...

Last post : Re:Vp990 and 29f64g08	Reply: lxl
MT29F64G08 is large capacity nand_flash. it is unfit using universal programmer. only read the chip, need time is about 5 hour!!

All replies (3)

[ Posted:2010-10-18 06:00:03 ]

vp-490 with am29f400bb-70se

sjonv

hello, i have read out this chip 3 times, every time the data in the bin has changed. Ive selected in the menu am29f400bbxxse. am i doing something wrong??　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　 wellon vp-490 ver. 4.3.1.

[ The message is modified by sjonv ]

Last post : Re:vp-490 with am29f400bb-70se	Reply: lxl
select "setting"-->"Modify Algorithm Parameters". change VCC form 5.00V to 4.6V

All replies (5)

[ Posted:2010-10-28 02:19:01 ]

VP-280 programmer

sadosp

Hello to all! I want to program an ATMega8-16 (Atmel) mcu, and I　have two firmware files for it. The program memory .hex flash file, and the data memory .eep　eeprom file. Can someone tell me please the procedure, to load the two files into the ic?　Regards Panos.s　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　

[ The message is modified by sadosp ]

Last post : Re:VP-280 programmer	Reply: sadosp
Thank you very much for your info! [ The message is modified by sadosp ]

All replies (2)

[ Posted:2010-10-02 05:56:27 ]

MC9S12DP512 VP980 add

inkub

Please add MC9S12DP512　on VP980.

MC9S12DPx64/128/256/512

[ The message is modified by inkub ]

Last post : Re:MC9S12DP512 VP980 add	Reply: gxj
VP-980 have already stop updated.

All replies (1)

[ Posted:2010-10-21 17:08:15 ]

ST 5P08C3 Support.

ernie

Hello. I"m a VP990 user. I"m trying to get ST 5P08C3 readed by the programmer but it seem like this memory isn"t supported. Is it possible to add it?

Last post : Re:ST 5P08C3 Support.	Reply: lxl
try select 95P08

All replies (1)

[ Posted:2010-10-21 09:25:33 ]

NAND512W9A2CNb

karrom

I HAVE VP-880 ..please add NAND512W9A2CNb　TSOP 48-U1

Last post : Re:NAND512W9A2CNb	Reply: KARROM
VP-880 can support NAND512W3A2CN6

All replies (2)

[ Posted:2010-10-17 23:57:55 ]

Do VP790 support WPH/ROM FILE

Bagus

Hello,
I already Buy VP790 and adapter directly from you distributor.
maybe i can ask you some question.
Do Wellon Vp790 Support ROM.or WPH file.?
If Wellon not Support, How to Convert those files, wph/rom to wellon support bios files, example BIN file.?
thanks for Respons.

Reply the message

[ Posted:2010-10-20 12:49:41 ]

ATF1508

lotharek

Hello,

i want to program ATF1508AS-15JC84 - they all have JTAG disabled. Which wellon may do it and which adapter should i buy ??

ps. I`m happy owner of vp280　for 2 years now :-)

Last post : Re:ATF1508 Reply: lxl Host

about ATF1508,please download new soft.
about 18f4620,our test is OK!please email photo.

All replies (5)

[ Posted:2010-10-11 04:47:34 ]

Use VP-280 to program HN462532

Richard

Hi,

We have the VP-280 programmer, it doesn"t list the HN462532 eprom,is there a　software version that can program this eprom?

Thanks
Richard

Last post : Re:Use VP-280 to program HN462532 Reply: lxl Host

VP-280 do not supports HN462532,because hardware

All replies (1)

[ Posted:2010-10-14 18:37:28 ]

tms27040 problem duplicating

jiglesias71 register

Hi everybody, I have just bought an VP-590, i program only two blank　tms27c040-15 memories succesfully but at the third and so on always tell me unsuccesfully or failure in duplicating the master eprom, someone knows msomething about it or i have to return it to the factory thaks

Last post : Re:tms27040 problem duplicating	Reply: cm
How long did you earse the chip by ultraviolet radiation eraser? Please erase it 40 minutes at least.The chip can be erased blank.You can programm it again.Please try it again.

All replies (7)

[ Posted:2010-10-12 10:15:56 ]

cyperess CY7c291-50pc problem

jiglesias

Hello, i read a new blank chip cypress cy7c291 to verify but　checksum 0007F800, i tried with another one it reads the same finally　read the master but　 reads exactly the same values. i gues if i read 100 they will read the same i am really very disaponted with this machine, i have just bought it because　 i just wanted to copy tms27c040　but the machine has problems with both devicess , tomorrow i will return it back to the store.

Last post : Re:cyperess CY7c291-50pc problem	Reply: lxl
please study how to use universal programmer. please refer "user manual".

All replies (3)

[ Posted:2010-10-12 11:33:11 ]

New TTL/CMOS test vector patterns

Fastah

Hi
After a many hours I got a few TTL/CMOS test vector patterns, some new, some corrected and tested on my VP980...
7490 (new), 7492 (corrected counting), 7493 (corrected counting), 74C901 (new), 74C902 (new), 74C906 (new), 75494 (new), 70C95/80C95 (new), 70C96/80C96 (new), 70C97/80C97 (new), 70C98/80C98 (new)
Can I send this txt file to your email or post here on forum for implementation in new software?

Thank you

Last post : Re:New TTL/CMOS test vector patterns Reply: lxl Host

please email to weilong@weilei.com.cn.
thank you

All replies (1)

[ Posted:2010-10-10 23:56:41 ]

ATMEGA parallel programing

inkub

Hello !

Needs support for parallel programming.
For example ATMega88
Please add this to the VP980

Last post : Re:ATMEGA parallel programing Reply: cm registered

VP-980 can support ATMega88. Please download the 4.2.0 version software.

All replies (1)

[ Posted:2010-09-25 18:41:25 ]

Block Protection

Catalinux

Hi,
I tried writing eeprom 25040 with VPN-290 and it is saying, Block Protection, and the ERASE button is turned OFF. Please tell me what it means. Thank you

Last post : Re:Block Protection	Reply: cm
The chip 25040 didn"t have erase function. You can programm this chip directly.So the ERASE button is turned off.This chip have Block Protection. Please click the Config botton,and select it according your need.And then click the Prog Config in the software right.

All replies (1)

[ Posted:2010-09-23 22:29:12 ]

VP-980 problem connect

s@parator

I noticed a problem with the connection in the VP-980 via an adapter with a series of agreements ebga64 S29GL128xxxxxx whether this can be improved.
The problem is also finding the system in a series

http://www.ic2ic.com/search.jsp?sSearchWord=M58LT128&prefix=M
or you can add him to the maintenance program...

Last post : Re:VP-980 problem connect	Reply: lxl
please email to us.we can not open the link.

All replies (9)

[ Posted:2010-09-17 17:55:10 ]

Flash/EPROM Emulator

inkub

Is not possible to add such a thing in the VP980?

inkub

Last post : Re:Flash/EPROM Emulator Reply: lxl Host

sorry, we can not.

All replies (1)

[ Posted:2010-09-07 19:10:42 ]

TTL &CMOS test - error result

Fastah

Please, can you change error result text alignment to improve readability?
See my example:
http://img830.imageshack.us/img830/3364/wellonttlcmostesterrorr.jpg

Thank you

Last post : Re:TTL &CMOS test - error result Reply: lxl Host

please email to us.

All replies (2)

[ Posted:2010-09-06 03:19:06 ]

PROM/ROM reading support on VP980

Fastah

Please add support for generic reading PROM/ROMs 23xx series (2316, 2332, 2364, 23128, 23256,...). All this PROM/ROM chips have little pinout difference compared with 27xx eprom series.
All chips can be read with "home made" pin adapters and selecting 27xx but please make support for this chips for reading directly into programmers socket with no need any wire acrobatics with wires :-)
Programming option must be disabled in software.
I can send pinouts to your mail.
Thank you

Last post :

Re:PROM/ROM reading support on VP980

Reply: Fastah registered

Hi
I sent to you all datasheets I have but you say 23xxx series ROMs are read-only memory, they don’t need program.
GALEP programmer have option for reading 23xx mask ROMs (please download their software) why WELLON　can"t do the same?
This will be great feature for backup mask ROM and program EPROM for replacement.

Thank you

[ The message is modified by Fastah ]

All replies (2)

[ Posted:2010-05-28 06:43:34 ]

PROM chips on VP980

Horvat

Please can you add PROM support with VP980?
For beginning I need read some PROM chips (Am27s19, 82s123, 82s191..)

Thank you

Last post : Re:PROM chips on VP980 Reply: Horvat registered

Hi
I"m not satisfied with the response. I bought two years ago new VP-980 (19.09.2008) and paid 455USD+35USD shipping from China. This is not old for me. I know that chips are old but they are easier to include in the support. I can"t every year to buy a new programmer for regular technical support. I use programmer for repair electronics and old computers and games.
Thank you

All replies (2)

[ Posted:2010-09-01 06:07:50 ]

Can You add new devices?

eLAB

Hi,

please can You add new devices ST72F321, ST72F324 etc.?

Thank You!

Reply the message

[ Posted:2010-09-01 04:26:49 ]

VP280 and missing eproms

Neo

hello
Can you add the eproms following:
- HN 27C4000G
- HN 27C1000G

please
thank you

Last post : Re:VP280 and missing eproms Reply: cm registered

VP-280 can"t support the chip HN 27C4000G and HN 27C1000G .

All replies (1)

[ Posted:2010-08-28 16:59:58 ]

Logic analyzer colors

Fastah

Hi
Please can you make lighter grey background on Logic analyzer. Red line is seen less... maybe you can implement setup for color settings under menu of Logic analyzer for background, vertical lines and trace lines?...
Also can you change font in buffer editor? Higher font... Curier regular size 10 like in WinHex looks perfect...
Thank you

Reply the message

[ Posted:2010-08-26 03:01:47 ]

vp480

juriko

I followed all the steps recommended, the update was done correctly, but the device is not recognized by the system, using WIN XP, AND THE DEVICE TO OPERATE PROPERLY. WHAT SHOULD I DO NOW?

Last post : Re:vp480	Reply: cm
I think you didn"t setup the USB driver.Or the USB driver is error.Please setup the USB driver.

All replies (1)

[ Posted:2010-08-25 11:04:35 ]

X28C64 XICOR

SAMUCAEN

I have a programmer VP-590, and I want to records memories X28C64 XICOR.I read the memory ok, but when I burn it, some address never burn (1540H to 157F) I have 13 memories with the same problem. If I burn on a CATLYST o ATMEL, the burn is correct, but not on a XICOR. I download the last version WELLON software but did not work. THANKS

Last post : Re:X28C64 XICOR	Reply: cm
We have test this chip with VP590, but there is not any problem with it.Do you add the adapter power when you used the programmer?

All replies (4)

[ Posted:2010-08-23 05:02:52 ]

vp480

alberto

I have a vp480, I get error 339, MSADCD.OCX component is missing or not valid, the USB cable is not recognized, and the pilot is lit in red. I can help. thanks

Last post : Re:vp480	Reply: cm
1 Please uninstall the wellon software. 2 Delete the "weilei"file in the system disk. 3 Download the newest software in our website. 4 Setup the newest software.

All replies (1)

[ Posted:2010-08-22 01:03:06 ]

program pic 16f876

josilpai02 register

HOW DO I PROGRAM IN A MICROCONTROLLER PROGRAMMER PIC 16F876A VP-490

Last post : Re:program pic 16f876	Reply: gxj
When you want to program PIC16f876A, you can do as follows: 　 1,Please select PIC16f876A in our software. 　 2,Please load the HEX file properly. 　 3,Click "Config"　button, select options according your need ,and then click "OK". 　 4,Select "Erase\Blank Check" and "Program\Verify" and "Prog Config" in　"Edit Auto" on the right side screen. 　 5,Last clilk "Prog" button.

All replies (1)

[ Posted:2010-08-05 20:47:07 ]

copy program

josilpai02 register

HOW DO I COPY A PROGRAM THAT IS ALREADY IN AN INTEGRATED CIRCUIT AND RECORDS AFTER YOU IN ANOTHER

Last post : Re:copy program	Reply: gxj
Please make sure your chip is not secured.If the chip is not secured, you can put your chip on the programmer"s socket and click "read",then put a new chip on the progremmer"s socket,click "prog".

All replies (1)

[ Posted:2010-08-05 20:36:52 ]

vp-280 59c11 8bit mode

JohnLuke

Hi all!

How to read/write 59c11 8bit mode ?

JohnLuke

Last post : Re:vp-280 59c11 8bit mode Reply: lxx registered

Please use editbuffer"s Swap 16 bit.

All replies (1)

[ Posted:2010-07-29 23:12:53 ]

SIM card programming

Taha

Is it possible to program/clone simcards for GSM providers?

Last post : Re:SIM card programming	Reply: lxx
We do not support simcard.

All replies (1)

[ Posted:2010-08-01 11:32:35 ]

VP-290 problem with TMS27C256-10

matchmielu register

Hi, I have the VP-290 programmer and I use Wellon Universal Programmer Ver.: 4.3.1(2010-07-21) and always when I trying to programm the EPROM TMS27C256-10 manufactured by Texas Instruments I have the message:

>>Man.Code:97　Dev. Code:04
>>.Blank Check......
>>Blank Check OK!
>>.Program......
>>Device Address:000000H　Device Data:00H　Buffer Address:000000H　Buffer Data:02H
>>Program fail!
>> 0,53Sec
----------------------------!

I try do it on 6 - 7 copy of TMS27C256-10

Last post : Re:VP-290 problem with TMS27C256-10 Reply: lxx registered

Please use AC adapter. And your chip had been erased more than 30 minutes.

All replies (1)

[ Posted:2010-07-21 16:35:26 ]

VP280 and PIC16F628A

vespo

Hi, i need to write some PIC16F628A and the programmer doesnt write correctly, i write the pic and the program gicen to me OK, i verify and the same, OK. But when i will test it on my circuit board its doesnt works. I have another programmer and with the other one i can write the same pic and it works on my circuit board. Do you know why this programmer doesnt write correctly this pic or its neccesary to configure some options??? I need your help.

[ The message is modified by vespo ]

Last post :

Re:VP280 and PIC16F628A

Reply: gxj registered

Its neccesary to programme configure .So When you want to program PIC16f628A, you can do as follows:
　 1,Please select PIC16f628A in our software.
　 2,Please load the HEX file properly.
　 3,Click "Config"　button, select options according your need ,and then click "OK".
　 4,Select "Erase\Blank Check" and "Program\Verify" and "Prog Config" in　"Edit Auto" on the right side screen.
　 5,Last clilk "Prog" button.

[ The message is modified by gxj ]

All replies (1)

[ Posted:2010-07-10 03:26:18 ]

VP-480 fails to program TMS2532

roodkapje

My VP-480 programmer fails to program TMS2532. It programs very slowly, and when it finishes, the EPROM is still blank.I tried 4 different chips, all of them brand new.

Last post : Re:VP-480 fails to program TMS2532	Reply: lxl
maybe your programmer is badly. VP-480 have stop updated.

All replies (10)

[ Posted:2010-06-22 00:45:07 ]

Atmel AVR

mcody

I have a vp-280 and am currently working on　an Atmel avr project. Is the vp-280 capable of isp; in system programming. Chip insertion into the target board many times is not fun. My thought is to build a cable adapter to go from vp-280 to board. I am not sure of vp280 programming method for avr; HVserial,parallel,spi,etc...

[ The message is modified by mcody ]

Last post : Re:Atmel AVR	Reply: lxx
VP-280 programming method for avr is parallel.VP-990 and VP-ISP support ISP programming method.

All replies (1)

[ Posted:2010-06-28 21:00:28 ]

Cant connect VP 280 on XP

Steven

I am having issues trying to connect my VP 280 to win xp

It was working fine the other night but now when i try and connect it comes up saying Warning Program Trouble Programmer initializing failure.

I have tried reinstalling the program usb driver and even trying another computer and still have the same issue

What could be casuing this?

I also tried shorting out JP1 and doing a update as what the manual says but still has the same issue

Any help would be great

Last post : Re:Cant connect VP 280 on XP Reply: lxl Host

maybe your programmer need repair

All replies (1)

[ Posted:2010-06-19 13:38:46 ]

VP-490 do not program PIC16F873A

Daniel

Hi, my new VP-490 cannot program Microchip PIC16F873A, and if I program, and after I read, it show data in diferent adresses, and if I read again, it show diferent datas, so I think it is a bug. I cannot program PIC12F675 also. Everything else is working ok, I`ve not tried another microchip microcontrollers.

[ The message is modified by Daniel ]

Last post : Re:VP-490 do not program PIC16F873A	Reply: lxl
about PIC16F873A,our test is OK! please send us its picture

All replies (1)

[ Posted:2010-06-17 12:48:07 ]

VP-380 RED LIGHT

piktas

I bought a programmer VP-380 two months ago. While programming MX25L8005M2C programmer showed writing mistake. I tried with other like　MX25L8005M2C and it shows the same mistake. I tried to update firmware, but after two hours I disconnected it from computer, because nothing happened. In this time, when I connect it with the computer, on programmer lights red light. I tried to update like it is written in user manual : short circuit on JP1. Connect with PC and wait for communication. Blue (LINK) is brigted, red blinking, after 1 haur (aprox) red is off. Green led is not bright. Enter WELLONs system but did not auto update. I tried update manualy, but have an eror "system update fail".
Would you help me with this problem?

[ The message is modified by piktas ]

Reply the message

[ Posted:2010-06-16 01:33:54 ]

VP-280

decoccio

I just bought a VP-280 and installed the latest version I have driver issues with my Windows7 64Bit

Last post : Re:VP-280	Reply: jin
Note: When use 64bit windows system and start the Operating System,please press the "F8",and then select"Disable Driver Signature Enforcement ".　 Details please see the web: "http://www.weilei.com/Wellon%2064%20Bit%20USB%20driver%20install%20guide.pdf".

All replies (1)

[ Posted:2010-06-12 22:29:13 ]

VP-280

pedro

Hello,

please let me know, why VP-280 can"t support AM29F200, AM29F400, AM29F800 in PSOP44 case? In 48pin case TSOP48 are supported! Thank you

[ The message is modified by pedro ]

Last post : Re:VP-280	Reply: jin
Sorry, VP-280 can not support them in psop44 because of its hardware. [ The message is modified by jin ]

All replies (1)

[ Posted:2010-06-11 16:53:15 ]

Vp-280

Andy

I tried to read from eprom M27C512 from ST using VP-280 using 4.3.0. However it reads as empty buffer always. When i change to version 3.9.7. Everything is working correctly. Is there software problem. Kindly look into this issue . Thanks

Last post : Re:Vp-280	Reply: Andy
Ok solved now it able to read ! thanks!

All replies (3)

[ Posted:2010-06-06 14:51:29 ]

ADD NEW DEVICES

RAZIK

i bought new VP-490 but ichecked and found missing a lot of recent devices as : Intel:
QB25F016S33B8 (2MB)
QB25F032S33B8 (4MB)
QB25F064S33B8 (8MB)

Last post : Re:ADD NEW DEVICES	Reply: RAZIK
and also missing : SST25VF032 (4MB) SST25VF032B (4MB) SST26VF032 (4MB) SST25VF064 (8MB) SST26VF064 (8MB) SST25VF128 (16MB)

All replies (2)

[ Posted:2010-06-09 20:32:04 ]

read problems wellon vp980

j-tag

hello,

Reply the message

[ Posted:2010-06-09 19:54:25 ]

Export test pattern

vr2yxt

I have defined test pattern for IC testing.When I upgrade the software,the software require me to unistall the previous verion. After install the new version, I cannot find my defined test pattern.

Can I export my defined test pattern and import them to new version software?

Last post : Re:Export test pattern Reply: jin registered

Your defined test pattern has saved in the files "TEST1.LIB" and "TEST.LIB".These two files are saved at "C:\weilei\WELLON\lib"(default document folder).So before you upgrade the software, you can copy these two files to other document folder.And after install the new version, you can copy these two files back to "C:\weilei\WELLON\lib".

All replies (1)

[ Posted:2010-06-09 13:22:00 ]

Total 1450,Total 29 pages

[<<][25][>>]

search: title content user

Web homepage | Contact us | About us

Tianjin Weilei Technology Ltd.

359.38 ms